Film obtained by laminating coating layer made of fluorine-containing acrylic resin on base film

Alternative exterior trim part

HIGH THERMAL CONDUCTIVITY LAYER FOR FIRE RESISTANT WOOD VENEER

Composite material including unidirectional continuous fibers and thermoplastic resin

Process for manufacturing carbon fiber fabrics and fabric manufactured with this process

Vehicle floor mat with watertight capped grommets

THREAD, AND ASSOCIATED EQUIPMENT PIECE OF A VEHICLE, FORMATION PROCESS TO MAKE A THREAD AND FABRICATION METHOD FOR MAKING A PIECE OF AUTOMOTIVE VEHICLE

Layered composite component

Application method for a film

Multilayer panel for soundproofing aircraft interiors

Multilayer dash isolation pad having superior formability and sound absorption performance

Vinyl chloride resin composition, vinyl chloride resin molded product, and laminate

FLUOROPOLYMER STRUCTURES

Inner trim part for a motor vehicle and having two layers of different optical characteristics

RESIN FILM, COMPOSITE SHEET USING SAME, AND RESIN MOLDED MEMBER

Vinyl chloride resin composition for powder molding, vinyl chloride resin molded product, and laminate

Headlining having heat shielding function for vehicle and manufacturing method thereof

VEHICULAR INTERIOR PART

Method of fabricating a trim and corresponding trim

Methods and production system for laminating interior components in vehicles

Crosslinked product, method for producing the same and the use thereof, and ethylene copolymer

FIBROUS COMPONENT FOR VEHICLE EXTERIOR AND METHOD FOR MANUFACTURING THE SAME

Thermal Spray for Corrosion Protection

COMPOSITE MEMBER AND SEAT SHELL

VEHICLE-INTERIOR MATERIAL AND PRODUCTION METHOD THEREFOR

Polyester-based tape composites for wood reinforcement

Corner arrangement for an article of furniture, article of furniture, and method of making the same

Sandwich laminate, sandwich structure and unified molded product using same and processes for producing both

Skin material

DUAL LAYER CARPET

Vinyl chloride resin composition, vinyl chloride resin molded product, and laminate

KNIT SPACER FABRICS AND MOTOR-VEHICLE INTERIOR

Method of fabricating a thermally insulating stretchable down feather sheet and the product therefrom

Multilayer floor covering

Fire-resistant, gas permeable decorative laminate

Hot melt adhesive

Decorative sheet and decorative resin molded article obtained using same

REINFORCED THERMOPLASTIC ARTICLES, COMPOSITIONS FOR THE MANUFACTURE OF THE ARTICLES, METHODS OF MANUFACTURE, AND ARTICLES FORMED THEREFROM

Injection molding of hollow articles

Reinforcing base fabric for urethane-foamed product

Polymeric materials

Multilayer nonwoven fabric for foam molding, method of producing multilayer nonwoven fabric for foam molding, urethane-foam molded complex using multilayer nonwoven fabric, vehicle seat, and chair

Multilayer composite interior component

Vehicle interior board and method for manufacturing the same

MULTI-LAYER SHEET MATERIAL AND METHOD FOR THE PRODUCTION THEREOF

Vinyl chloride resin composition for powder molding, and vinyl chloride resin molded body and laminate

Coextruded, crosslinked multilayer polyolefin foam structures from recycled polyolefin foam material and methods of making the same

Coextruded, crosslinked multilayer polyolefin foam structures from recycled metallized polyolefin material and methods of making the same

Method for forming a headliner

Fabrication method for making an equipment device for an automotive vehicle and associated equipment device for an automotive vehicle comprising a composite body

Method for forming motor vehicle seat uphosltery

Epoxy resin-based composition as a filler honeycomb cells

PROCESS FOR PRODUCTION OF FOAM LAMINATE PRODUCT

Method of manufacturing in-mold decorative appliqué with textured surface

Method in which a vehicle interior trim part with a decor layer comprising paper layers is produced

RESIN LAMINATED BODY

Synthetic leather for steering wheel cover having improved durability and method for preparing the same

Wrapped part assembly with edge/corner defining inserts

Method of manufacturing a trim component with hidden tear pattern and trim component with hidden tear pattern

High sound absorption coefficient expanded PTFE composite fiber cotton

STONE SHEET MADE OF REAL STONE FOR AN AUTOMOBILE INTERIOR MATERIAL AND METHOD OF MANUFACTURING

Decorative film

Moldable natural fiber nonwoven wire harness trough and method of construction thereof

Light-emitting part for vehicle

Multilayer load bearing panel

Hemmed structure and hemming method

Method and apparatus for blind stitching a formed component and components formed from the method

Localized thickening of a decorative skin

MELAMINE RESIN METAL DECORATIVE PANEL AND METHOD OF MANUFACTURING MELAMINE RESIN METAL DECORATIVE PANEL

Sound-absorbing material and wire harness equipped with sound-absorbing material

Cladding element for vehicle floor area

DESIGN AND PROCESSES FOR MAKING LIGHT, STIFF AND STRONG STRUCTURES

Vehicle interior board and method for manufacturing the same

Skinned substrates with highly crosslinked polyurethane layer

STRUCTURE OF MULTILAYER COMPONENT

Polymeric sheets, methods for making and using the same, and articles comprising polymeric sheets

Cold lamination with radiation

Fiber-reinforced resin sheet, integrated molded product and process for producing same

VEHICLE INTERIOR TRIM COMPONENTS AND ASSOCIATED METHODS

Pre-filled radius layups

LAMINATE FLOOR LINER

Metallized polymeric film reflective insulation material

Glass chopped strand mat, method for producing same, automotive molded ceiling material, and method for producing same

RESIN FILM AND SLICED VENEER SHEET USING SAME AND AUTOMOBILE INTERIOR MEMBER

Vehicle interior panels with sealed stitching

Method of making a laminated trim component at a molding station

MANUFACTURING METHOD OF HIGHLY HEAT-RESISTANT SOUND ABSORBING AND INSULATING MATERIALS

Dash pad for vehicle

Method for manufacturing a vehicle interior trim part as well as a vehicle interior trim part

Multi-layer composite part

Laminated sheet and method of manufacturing the same

Vehicle interior panel with airbag tear seam formed by mechanical piercing

Composite layer

Low energy process for making curved sandwich structures with little or no residual stress

Method for producing at least two-layer components, and component

Stacked composite component

Manufacturing method of highly heat-resistant sound absorbing and insulating materials

Resin molded article with a stitch pattern

Vehicle interior panel and vehicle airbag device

NONWOVEN FABRIC LAMINATE FOR FOAM MOLDING, URETHANE FOAM MOLDING COMPOSITE INCLUDING SAID NONWOVEN FABRIC LAMINATE, AND METHOD FOR MANUFACTURING NON-WOVEN FABRIC LAMINATES FOR FOAM MOLDING

Articles including high melt flow index resins

Crash pad for vehicles and method for manufacturing the same

Impact Absorbing Composite Material

STRUCTURAL ADHESIVE FILM

Method for providing a lamination film with adhesive, method for applying hot melt, application, lamination plant and method for upgrading such a plant

Encapsulants for window assemblies

Machine for forming a headliner

Apparatus for pressure bonding of a covering on an automotive interior component and a method for pressure bonding thereof

SOUND-DEADENING MULTILAYER POLYMERIC STRUCTURES

Synthetic resin laminate

Cover panel for at least one display instrument in a vehicle

Leisure articles and cars prepared by multilayer rotational moulding

Flooring for vehicle decks and manufactured housing

CARRIER FOR A VEHICLE INTERIOR TRIM PART, A VEHICLE INTERIOR TRIM PART, AS WELL AS A METHOD FOR MANUFACTURING A CARRIER

Thermally insulating stretchable down feather sheet and method of fabrication

FIRE RESISTANT SUSTAINABLE AIRCRAFT INTERIOR PANELS

DECORATION FILM USING NATURAL CORK MATERIALS AND METHOD FOR MANUFACTURING THE SAME

Method for manufacturing synthetic leather using different liquid silicone rubber coating solutions

Light-weight, multi-layered composite substrate and method of making the same

NATURAL FIBER POLYMER COMPOSITE AND ECO-FRIENDLY LIGHTWEIGHT BASE MATERIAL FOR AUTOMOTIVE INTERIOR

Compensation layer and method for production of the same

Decoration article having clear layer and method of forming the same

ASSEMBLY INCLUDING A COMPRESSION-MOLDED COMPOSITE COMPONENT HAVING A SANDWICH STRUCTURE WITH A CELLULOSE-BASED CORE AND AT LEAST ONE FASTENER COMPONENT

Method of making a sandwich-type composite panel having a cellulose-based core and a living hinge and panel obtained by performing the method

Vehicular floor mat

COMPOSITE COMPONENT MADE OF PLASTIC

Multilayer polymeric structure

Vehicle interior member

Car internet sheet using hygiene product and manufacturing method thereof

Metallized polymeric film reflective insulation material

Manufacturing method of integrated foam-molded product

Multilayer load bearing panel

Method for Manufacturing Non-Woven Composite Layer Product with Different Hardnesses

Injection molded composite blank and guide

VEHICLE INTERIOR MEMBER

Method for manufacturing an interior lining part and corresponding part

Method and device for producing an interior covering part

Aircraft interior trim panel, and aircraft fitted with such panels

Process for manufacturing carbon fiber fabrics and fabric manufactured with this process

SEAT AND ITS USE

Method of making a sandwich-type composite panel having a living hinge and panel obtained by performing the method

VEHICLE PANEL

INFRARED WELDING PROCESS FOR BONDING PORTIONS OF A VEHICLE INTERIOR ASSEMBLY

Molded interior material for vehicle and manufacturing method thereof

Method for producing glass chopped strand mat, and method for producing automotive molded ceiling material

Articles made of multilayer composite material and preparation methods thereof

Process for the production of polyurethane composite components

Method for producing an interior trim part of a vehicle

Composite panel

Amino resin film and method of producing the same

Trim part and method for producing a trim part

Convertible top having a fabric outer skin

Encapsulants for window assemblies

Element having a decorative surface

Moulded multilayer lining for heat and sound insulation

Vehicle interior components with decorative stitching

COMPOSITE MATERIALS

Transfer mold body

Imitation leather and method for producing same

MULTILAYER SHEET AND METHODS OF MAKING AND ARTICLES COMPRISING THE MULTILAYER SHEET

Method of making a sandwich-type composite panel having a living hinge and panel obtained by performing the method

Interior part for vehicle and method for treating edge thereof

Composite material

Air vehicle with a slip protecting and gas sealing composite floor

IN-MOLD GRAIN SKIN LAMINATION FOR INTERIOR TRIM PANEL WITH DECORATIVE APPLIQUÉ

Foam filled panel with sealed decorative stitching and process for manufacture thereof

Method for producing ornament

Interior material for vehicle

Heat reflective material

Multi-layer film, decorative molding film and molded body

Vehicle interior component with vacuum-laminated foam laminate

Insert sheet for an automobile interior material, and a production method for the same

Vehicle component fabricated with a hot melt adhesive, and a method and device for the manufacture thereof

Method of producing a resin molded article

Method for multi-color vehicle interior components and components formed from the method

Metallized polymeric film reflective insulation material

ADHESION PROMOTER SYSTEM, AND METHOD OF PRODUCING THE SAME

LAMINATED SHEET FOR INTERIOR MATERIAL OF VEHICLE

METHOD FOR LAMINATING A FLEXIBLE MATERIAL LAYER ONTO A SUBSTRATE HAVING A THREE-DIMENSIONAL CONTOUR AND DEVICE FOR THE SAME

METHOD FOR PRODUCING A TRIM PART PROVIDED WITH A PAINT FILM AND TRIM PART

Lightweight, multi-layered structural composites using recycled landfill-bound scrap

Airbag cover materials for laser scoring

Sandwich component and method for the production thereof

Stitched seams for vehicle interior coverings

Pre-fixing a laminating material on a component surface

LAMINATING A COMPONENT

Method for making a composite article

Multi-Layer Sheet Material and Method for the Production thereof

COLD LAMINATION WITH RADIATION

SILICONE CAP LAYER LAMINATES

FILM MEMBER, FILM MOLDED PRODUCT, FILM MEMBER PRODUCING METHOD, AND FILM MOLDED PRODUCT PRODUCING METHOD

Moulded trim component for covering an airbag in a motor vehicle

Soundproof material for vehicle

USE OF INORGANIC PARTICLES TO PRODUCE A BARRIER LAYER ON AIRCRAFT COMPONENTS

FOIL LAME' FABRICS AND METHODS OF MAKING FOIL LAME' FABRICS

NANO-COATINGS FOR ARTICLES

MULTILAYER LIGNOCELLULOSE-CONTAINING MOLDINGS HAVING LOW FORMALDEHYDE EMISSION

System and method for sealing a hemmed closure

UNIVERSAL CONNECTABLE, COLLECTABLE OBJECT OR OBJECTS

Assembly for fabricating a structure having a crystalline film, method of making the assembly, crystalline film structure produced by the assembly and crystalline films

MULTI-LAYER METALIZED THERMAL BAG

Multilayer films, their methods of production, and articles made therefrom

Open-Cell Foams Having Superabsorbers

Multi-layer assembly with retention feature

Method of making multilayer polyurethane protective film

Multilayer body

Metal panel assembly

CUT SHEET STOCK MYCELIUM AND METHOD

AUTOMOBILE USE MAT WITH A DISTINGUISHED ANTI-SLIP FEATURE

Method for producing a decorative leather element

Moulded product for automotive panels

ETHYLENIC POLYMER AND ITS USE

Vehicle interior part

INSTRUMENT PANEL WITH INTEGRAL HIDDEN DOOR COVER AND METHOD OF MANUFACTURE THEREOF

RIGIDITY CONTROLLED FIBERGLASS

DECORATIVE SYSTEM COMPOSITE AND METHOD

FIRE RESISTANT VENEER ASSEMBLY FOR AIRCRAFT INTERIORS

Floor mat and method for manufacturing a floor mat

FOAM LAMINATE PRODUCT AND PROCESS FOR PRODUCTION THEREOF

Soundproofing assembly for an automobile, and associated wall element

Floor mat

Self-Tearing Interior Wrap

In-mold decorative applique with textured surface

Sandwich panel including honeycomb structure body and method of producing the sandwich panel

Recyclable Composite Plastic Panel

PAPER-BASED COMPOSITE MATERIAL

Production method for a panel

THERMALLY FUSIBLE INTERLINING NONWOVEN AND PRODUCTION AND USE THEREOF

METHOD OF MAKING AUTOMOTIVE BODY PARTS

Nonwoven textile made from short fibers

Vehicle interior member

Metallized polymeric film reflective insulation material

Natural Fiber Trim Panel

Impact absorbing structural body, shell type frame member and seat structure

TRIM COMPONENT AND METHOD OF EDGE FOLDING

CUT SHEET STOCK MYCELIUM AND METHOD

PROCESS FOR PRODUCING A COMPOSITE COMPONENT FROM PLASTIC, COMPOSITE COMPONENT PRODUCED BY THIS PROCESS AND USE OF SUCH A COMPONENT

FIBER COMPOSITE MATERIALS OF CONSTRUCTION, PARTICULARLY FOR ROOF LINER STRUCTURES

Sandwich panel, method of forming core material for sandwich panel, and method of forming sandwich panel

STEERING WHEEL HEATER ASSEMBLY

Wrapped three-dimensional shaped article and process for its production

Crash Energy Absorbing Furniture Top

SINGLE SIDE STITCHING FOR INTERIOR SKINS

Compostable interior panel for use in a vehicle and method of manufacture

METHOD FOR MANUFACTURING FLAT MOLDED MEMBERS OR FILMS

FORMED MATERIAL FOR VEHICLE INTERIOR COMPONENT

Fluororesin film and fluororesin-laminated acrylic resin film

ACOUSTIC SHIELD

Method for making a vehicle component

Process For The Production Of Polyurethane Composite Components

Vehicle panel

Fluororesin film and fluororesin-laminated acrylic resin film

Interior panel component with integrated airbag cover

Thermoplastic elastomer composition for foaming, molded foam thereof, composition molded product using the molded foam, and instrument panel for automobile

CONSOLE CARPET

Leisure articles and cars prepared by multilayer rotational moulding

Member with skin

Structural member and seat structure for transport machine

TRIM COVER ASSEMBLY AND A METHOD OF MANUFACTURE

VEHICLE ROOF HEADLINER AND METHOD OF MANUFACTURING THE SAME

FLOOR MAT

Hotmelt adhesives having an extended open time

PERFORATED-CORE COMPOSITE PANEL, DEVICE AND METHOD FORMANUFACTURING SUCH A PANEL

SPLIT LEATHER PRODUCT AND MANUFACTURING METHOD THEREFOR

Method and apparatus for producing a three-dimensionally molded, laminated article with transfer-printed surface decoration

Multi-layer composite materials comprising a foam layer, corresponding method of production and use thereof

Multi-layer composite materials comprising a cellulose-containing layer, corresponding method of production and use thereof

DOUBLE-CAST SLUSH MOLDING COMPOSITIONS

MULTI-LAYER COMPOSITE MATERIAL, PRODUCTION AND USE THEREOF

Multilayer structure polymer and resin composition together with acrylic resin film material, acrylic resin laminate film, photocurable acrylic resin film or sheet, laminate film or sheet and laminate molding obtained by laminating thereof

Decorative laminates incorporating flame retardant engineering thermoplastic films

Low Cost Interior Wrap

Support structure

PANEL WITH HIGH STRUCTURAL STRENGTH, DEVICE AND METHOD OF MAKING SUCH A PANEL

ARTIFICIAL LEATHER FOR AUTOMOBILE INTERIOR MATERIALS AND METHOD FOR PRODUCING THE SAME

VIBRATION DAMPENING MATERIAL AND METHOD OF MAKING SAME

MULTILAYER FOIL

FLEXIBLE LAMINATE SHEET MATERIALS

Manufacturing method of a vehicular interior part

Reinforcing material for vehicle ceiling material

SURFACE TREATMENT FOR POLYMERIC PART ADHESION

Carpet backings prepared from hydroxylated vegetable oil-based polyurethanes

(METH)ACRYLIC FILM, AND MARKING FILM AND RECEPTOR SHEET USING THE SAME

Automotive airbag cover and method of manufacturing automotive airbag cover

Elastomeric urethane composition

Automotive headliner composite structure

In mold lamination of decorative products

Decorative sheet and decorative molded article

Synthetic resin leather

Decorative trim and method for making same

Method of manufacturing an activated carbon fiber soft electric heating product

PLASTICS COMPOSITE MOULDING WITH A THREE-LAYER STRUCTURE

Sandwich panel

Method of making multilayer polyurethane protective film

Fire Combustion Modified Batt

LAMINATED BODY FOR VEHICLE AND METHOD OF PRODUCING THE SAME

METHOD OF MAKING A BACK-MOLDED PLASTIC PART

MULTIZONE WOOD POLYMER COMPOSITE ARTICLE

Method and apparatus for producing a three-dimensionally molded, laminated article with transfer-printed surface decoration

Acoustic Composite and Twin-Shell Lightweight Trim Part Comprising Such a Composite