141308 ⎘
Fuel-injectors not provided for in groups - or; Details not provided for in, or of interest apart from, the apparatus of groups - ; Closing valves mechanically, e.g. arrangements of springs or weights or permanent magnets; Damping of valve lift Means specially adapted for varying the spring tension or assisting the spring force to close the injection-valve, e.g. with damping of valve lift
FUEL INJECTION VALVE
#2High pressure fuel pump with mechanical pressure regulation
#3Method for producing a metering valve, and metering valve
#4Fuel injector with combined calibration tube, fuel filter, and pressure pulsation damping orifice
#5Valve for metering a fluid
#6Surge relief valve
#7Valve Assembly For An Injection Valve
#8Fuel valve for a large two-stroke self-igniting internal combustion engine
#9Injection nozzle for fuels
#10Fuel injector having external setting of the coil spring
#11Fuel injection valve
#12Fuel delivery assembly for an internal combustion engine
#13Fuel injection nozzle
#14FUEL INJECTION VALVE
#15Fuel Injector
#16Filter assembly for a fuel injector
#17Fuel injector having a throttle element
#18Injector for a combustion engine
#19Electronically controlled fuel injection valve
#20Valve assembly for a fuel injector and fuel injector
#21Electronically controlled fuel injector with fuel flow rate substantially independent of fuel inlet pressure
#22Hydraulic coupling
#23Valve for metering fluid
#24Fuel injector and fuel injection device using the same
#25Electronically controlled fuel injection valve
#26Valve assembly for an injection valve, injection valve and method for assembling a valve assembly of an injection valve
#27Fuel injector
#28Electromagnetic Fuel Injection Valve and Internal Combustion Engine Control Device Using the Same
#29Fuel injector
#30Injection valve
#31Valve assembly for an injection valve and injection valve
#32Fuel injector having a body with asymmetric spray-shaping surface
#33Outward opening fuel injector
#34DAMPING ARRANGEMENT FOR A FUEL INJECTOR
#35Fuel injection valve for internal combustion engines
#36Compression ignition engine and method for controlling same
#37THROTTLE ON A VALVE NEEDLE OF A FUEL INJECTION VALVE FOR INTERNAL COMBUSTION ENGINES
#38Fluid injection valve
#39Fluid oscillator assembly for fuel injectors and fuel injection system using same
#40Electronic unit injectors
#41Fuel injector
#42Fuel injection apparatus
#43Fuel injection device
#44INJECTOR FOR A FUEL INJECTION SYSTEM
#45Electro-magneto fuel injector
#46FUEL INJECTOR WITH MECHANIC DAMPING
#47Piezoelectric actuator with multi-function spring and device using same
#48FUEL INJECTION VALVE
#49Actuated cool combustion emissions solution for auto-igniting internal combustion engine
#50Outward opening fuel injector
#51Injection Valve
#52Fuel injection system suitable for low-viscosity fuels
#53Valve member to armature coupling system and fuel injector using same
#54Fuel injection device
#55Fuel injector
#56Fuel injector for a direct injection internal combustion engine
#57Direct needle control fuel injectors and methods
#58Injection Nozzle
#59Damping arrangement for a fuel injector
#60Common Rail Injector
#61Electro-magneto fuel injector
#62Electromagnetic fuel injection valve
#63Air and fuel supply system for combustion engine
#64Common rail injector with active needle closing device
#65Fuel-injection valve
#66Fluid injection valve
#67Valve for controlling a connection in a high-pressure fuel injection apparatus for an internal combustion engine
#68Injection nozzle
#69Fuel injection device for an internal combustion engine
#70Fuel injection device for an internal combustion engine
#71Fuel injection system for an internal combustion engine
#72Control valve for a fuel injector comprising a pressure exchanger
#73Hydraulically intensified injectors with passive valve and methods to help needle closing
#74Common rail injector with active needle closing device
#75Injection nozzle
#76Device for attenuating the stroke of the needle in pressure-controlled fuel injectors
#77Fuel injection device
#78Deep pocket seat assembly in modular fuel injector with unitary filter and O-ring retainer assembly and methods
#79Deep pocket seat assembly in modular fuel injector with fuel filter mounted to spring bias adjusting tube and methods
#80Fuel injection system for internal combustion engine
#81Pressure-boosted fuel injection device comprising an internal control line
#82Fuel injection device for internal combustion engines
#83Injection nozzle for internal combustion engines
#84Fuel injector provided with a servo leakage free valve
#85Fuel injector with multi-part injection valve member and with pressure booster
#86Fuel injection system
#87Fuel injector with and without pressure ampification with a controllable needle speed and method for the controlling thereof
#88Air and fuel supply system for combustion engine
#89Fuel injection valve for internal combustion engines
#90Fuel injection valve
#91Fuel injection device having hydraulic nozzle needle control
#92Fuel injection system for internal combustion engines with needle stroke damping
#93Fuel injection device for an internal combustion engine
#94Fuel injector with auxiliary valve
#95Fuel injector comprising booster for multiple injection
#96Three-way valve and fuel injection device having the same
#97Device for damping the needle lift in fuel injectors
#98Fuel injection valve