TURBINE FUEL NOZZLE ASSEMBLY AND METHOD FOR OPERATING A TURBINE

System and method for supplying a working fluid to a combustor via a non-uniform distribution manifold

Combustor and method for distributing fuel in the combustor

Late lean injection system transition piece

System for secondary fuel injection in a gas turbine engine

Method and apparatus for swaged liquid injector spoke

Apparatuses and systems with vertically and longitudinally offset mounting flanges

Combustion chamber for an aircraft engine, and method for attaching an injection system in a combustion chamber of an aircraft engine

Fuel manifold with jumper tubes

Fuel nozzle and method of repair

Leaf spring damper for a turbine engine fuel delivery system

Swirler assembly with compressor discharge injection to vane surface

COMBUSTOR AND METHOD FOR SUPPLYING FUEL TO A COMBUSTOR

Combustor and method for supplying fuel to a combustor

Combustor and method for supplying fuel to a combustor

System and method for reducing combustion dynamics and NOin a combustor

Fuel injection assembly for use in turbine engines and method of assembling same

Hydrogen-rich gas combustion device

EFFUSION COOLED NOZZLE AND RELATED METHOD

Gas turbine and gas-turbine plant having the same

System for cooling a multi-tube fuel nozzle

Steam injected gas turbine engine

MULTI-FUEL INJECTION NOZZLE

Combustor leaf seal arrangement

Assemblies and apparatus related to integrating late lean injection into combustion turbine engines

Methods relating to integrating late lean injection into combustion turbine engines

Sector nozzle mounting systems

BURNER, GAS TURBINE COMBUSTOR, BURNER COOLING METHOD, AND BURNER MODIFYING METHOD

Combustor dome with combined deflector/mixer retainer

Cooling scheme for an increased gas turbine efficiency

Combustor Housing for Combustion of Low-BTU Fuel Gases and Methods of Making and Using the Same

System And Method for Cooling a Fuel Injector

Combustor nozzle and method for modifying the combustor nozzle

Integrated late lean injection on a combustion liner and late lean injection sleeve assembly

Reheat burner injection system with fuel lances

Multipoint injectors with standard envelope characteristics

Gas turbine combustion cap assembly

Gas turbine engine combustor with lobed, three dimensional contouring

Fuel injector and support plate

Head part of an annular combustion chamber

METHOD AND ASSEMBLY FOR RETROFITTING A GAS TURBINE COMBUSTOR END COVER

Head part of an annular combustion chamber

Reheat burner injection system

Combustion chamber head with holding means for seals on burners in gas turbines

Segmented combustion chamber head

Recirculating product injection nozzle

Gas turbine combustor having a fuel nozzle for flame anchoring

Burner assembly including a fuel distribution ring with a slot and recess

Fuel injector mounting system

Multipoint injection device for a combustion chamber of a turbine engine

Multipoint injector for a turbine engine combustion chamber

Traversing fuel nozzles in cap-less combustor assembly

Fuel injector bearing plate assembly and swirler assembly

FUEL INJECTION ASSEMBLY FOR USE IN TURBINE ENGINES AND METHOD OF ASSEMBLING SAME

Fuel injector assembly

Multipoint injector for turbomachine

COMBUSTOR AND A METHOD FOR REPAIRING A COMBUSTOR

TURBINE FUEL NOZZLE ASSEMBLY

Fuel nozzle, gas turbine combustor with the same, and gas turbine with the same

Gas turbine combustor endcover assembly with integrated flow restrictor and manifold seal

Stress reduction feature to improve fuel nozzle sheath durability

Fuel nozzle passive purge cap flow

Fuel atomization dual orifice fuel nozzle

COOLING FLOWPATH DIRT DEFLECTOR IN FUEL NOZZLE

Pegless secondary fuel nozzle including a unitary fuel injection manifold

Gas turbine assembly and method therefor

Thermal management for fuel injectors

Gas turbine engine combustor and method for delivering purge gas into a combustion chamber of the combustor

End-fed liquid fuel gallery for a gas turbine fuel injector

SYSTEM AND METHOD FOR COOLING A NOZZLE

System and method for cooling a nozzle

SYSTEM AND METHOD FOR COOLING A NOZZLE

Air-cooled swirlerhead

Fuel injector sans support/stem

Apparatus and method for cooling a combustor cap

FUEL NOZZLE WITH CENTRAL BODY COOLING SYSTEM

Flame tolerant secondary fuel nozzle

Shielding wall for a fuel supply duct in a turbine engine

FLUID COOLED INJECTION NOZZLE ASSEMBLY FOR A GAS TURBOMACHINE

FUEL INJECTOR PURGE TIP STRUCTURE

Apparatus and method for a fuel nozzle

INJECTORS UTILIZING LATTICE SUPPORT STRUCTURE

Fuel lance for A burner

Fuel injection system for a combustion chamber of a turbomachine

Burner arrangement

Burner arrangement

Gas turbine combustion device

Fuel nozzle for a turbine engine with a passive purge air passageway

Gas turbine engine combustion chamber comprising CMC deflectors

Burning element and burner with a corrosion-resistant insert

Apparatus and methods for fuel nozzle frequency adjustment

APPARATUS AND METHODS FOR FUEL NOZZLE FREQUENCY ADJUSTMENT

Fuel nozzle seal spacer and method of installing the same

FUEL NOZZLE LIP SEALS

Fuel injector mounting system

Fuel injector mounting system

Fuel injector mounting system

Annular combustion chamber for a gas turbine engine

Apparatus and method for cooling nozzles

Fuel nozzle and method of repair

Fuel nozzle assembly for use as structural support for a duct structure in a combustor of a gas turbine engine

Fuel nozzle cup seal

Diffuser for turbine engine including indented annular webs

Fuel injector for use in a gas turbine engine

Self-contained oil feed heat shield for a gas turbine engine

Fuel spraying apparatus of gas turbine engine

Combustion chamber head of a gas turbine

Fuel nozzle guide plate mistake proofing

Fuel nozzle assembly for a gas turbine engine

Methods and systems to thermally protect fuel nozzles in combustion systems

METHOD FOR LOW NOx COMBUSTION OF SYNGAS / HUGH HYDROGEN FUELS

Fuel injector for a gas turbine engine

Burner, operating method and assembly method

METHOD AND APPARATUS FOR AIR AND FUEL INJECTION IN A TURBINE

Method and apparatus for combustor nozzle with flameholding protection

Combustor liner

Combustion burner

Fuel spray apparatus for gas turbine engine

Gas turbine premixer with internal cooling

Fuel injector nozzles for gas turbine engines

Fuel nozzle spring support for shifting a natural frequency

APPARATUS AND METHOD FOR COOLING GAS TURBINE ENGINE COMBUSTORS

Secondary combustion system for reducing the level of emissions generated by a turbomachine

Fuel nozzle liquid cartridge including a fuel insert

Nozzle design to reduce fretting

Fuel delivery system with reduced heat transfer to fuel manifold seal

Gas turbine combustor

Gas turbine combustor having a dual fuel supply system

Apparatus for fuel injection in a turbine engine

USE OF INERT GASES FOR SHIELDING OXIDIZER AND FUEL

Combustor assembly and cap for a turbine engine

Cooling structure of gas turbine combustor

TRAVERSING FUEL NOZZLES IN CAP-LESS COMBUSTOR ASSEMBLY

Burner for a gas turbine

Method and apparatus to facilitate cooling of a diffusion tip within a gas turbine engine

FUEL NOZZLE WITH SWIRLER VANES

Fuel injector arrangement having porous premixing chamber

Fuel delivery system and method of assembling the same

Combustor housing for combustion of low-BTU fuel gases and methods of making and using the same

Fuel nozzle detachable burner tube with baffle plate assembly

Turbomachine with separate fuel injection systems, using identical sealing joints

Thermal management for fuel injectors

Nozzle tip assembly with secondary retention device

Flame holding tolerant fuel and air premixer for a gas turbine combustor

Multi-tubular fluid transfer conduit

Method and apparatus for introducing diluent flow into a combustor

METHOD AND APPARATUS OF FUEL NOZZLE DILUENT INTRODUCTION

METERING OF DILUENT FLOW IN COMBUSTOR

Premixed direct injection nozzle

Active thermal protection for fuel injectors

Thermal protection for fuel injectors

External rigid fuel manifold

Combustor Apparatus for Use in a Gas Turbine Engine

Reusable weld joint for syngas fuel nozzles

Method of manufacturing a unitary conduit for transporting fluids

Fuel nozzle tip assembly

Segmented combustor cap

Turbomachine combustion chamber

Fuel injector sans support/stem

Gas turbine engine combustor and method for delivering purge gas into a combustion chamber of the combustor

Turbomachine injection nozzle including a coolant delivery system

TURBINE ENGINE FUEL NOZZLE

Combustor apparatus in a gas turbine engine

Turbine engine flow sleeve

Centerbody cap for a turbomachine combustor and method

Nested channel ducts for nozzle construction and the like

Apparatus for discouraging fuel from entering the heat shield air cavity of a fuel injector

Turbomachine combustion chamber

Method for low NOx combustion with low pressure drop

Axially staged combustion system for a gas turbine engine

REPAIRABLE FUEL NOZZLE

METHOD OF MANUFACTURING A FUEL DISTRIBUTOR

Unitary conduit for transporting fluids

Swirlers

Fuel nozzle

METHOD OF MANUFACTURING A UNITARY VENTURI

VENTURI

Mixer for a combustor

Fuel distributor

METHOD OF MANUFACTURING A UNITARY SWIRLER

METHOD OF MANUFACTURING MIXERS

METHOD OF REPAIRING A FUEL NOZZLE

REPAIR OF FUEL NOZZLE COMPONENT

Combustion cap floating collar using E-seal

Crack resistant combustor

Fuel nozzle assemblies and methods

Gas turbine engine fuel supply arrangement using plural distinct fuels

Air-cooled swirlerhead

Combustor end cap assembly

Fuel nozzle enclosure

Modular fuel nozzle air swirler

Device for guiding an element in an orifice in a wall of a turbomachine combustion chamber

Gas turbine fuel injector with insulating air shroud

Gas turbine fuel injector with removable pilot liquid tube

ARRANGEMENT OF INJECTION SYSTEMS IN AN AIRCRAFT ENGINE COMBUSTION CHAMBER END WALL

Burner arrangement

Turbomachine with annular combustion chamber

Fuel injector nozzles, with labyrinth grooves, for gas turbine engines

Multipoint injector for turbomachine

Fuel nozzle apparatus, gas turbine, and method of controlling fuel nozzle apparatus

Stress reduction feature to improve fuel nozzle sheath durability

Interface between a combustor and fuel nozzle

System for reducing combustor dynamics

Chamber endwall, method of producing it, combustion chamber comprising it, and turbine engine equipped therewith

Fuel nozzle flange with reduced heat transfer

Dynamic sealing assembly to accommodate differential thermal growth of fuel injector components

Gas turbine fuel injector with a removable pilot assembly

Splash plate dome assembly for a turbine engine

Method and apparatus for cooling gas turbine engine combustors

Component for fuel supply

Gas turbine floating collar arrangement

Fuel conveying member for a gas turbine engine

Gas turbine internal manifold mounting arrangement

Turbine engine combustion chamber with tangential slots

Turbomachine combustion chamber arrangement having a collar deflector

Fuel spraying apparatus of gas turbine engine

Apparatus and method to compensate for differential thermal growth of injector components

Device for fastening a sequentially operated burner in a gas turbine arrangement

Arrangement for a jet engine combustion chamber

Method and apparatus for heat shielding gas turbine engines

Gas turbine engine fuel injector

Transverse wall of a combustion chamber provided with multi-perforation holes

System and method for cooling a staged airblast fuel injector

Cooling of a multimode fuel injector for combustion chambers, in particular of a jet engine

Combustor assembly

Internally mounted device for a pressure vessel

Device for attaching a flame-arrestor arm to an afterburner casing and afterburner comprising such a device

Device for injecting a mixture of air and fuel, and a combustion chamber and turbomachine provided with such a device

Turbine engine fuel nozzles and methods of assembling the same

Combustion chamber end wall with ventilation

Reduced thermal stress fuel nozzle assembly

APPARATUS FOR ASSEMBLING GAS TURBINE ENGINE COMBUSTORS

Combustor and component for a combustor

System of attaching an injection system to a turbojet combustion chamber base

Device for guiding an element in an orifice in a wall of a turbomachine combustion chamber

Device for feeding fuel to a combustion chamber in a turbomachine

Low smoke and emissions fuel nozzle

Burner, gas turbine combustor, burner cooling method, and burner modifying method

Nested channel ducts for nozzle construction and the like

Internal fuel manifold with airblast nozzles

Fuel injector bearing plate assembly and swirler assembly

METHOD AND APPARATUS FOR COOLING GAS TURBINE FUEL NOZZLES

Turbine engine combustor with bolted swirlers

Heat shield for a fuel manifold and method

Gas turbine engine carburetor with flat retainer connecting primary and secondary swirlers

Pilot nozzle heat shield having connected tangs

Support system for a pilot nozzle of a turbine engine

Device for fastening a fluid duct to a turbojet casing

Turbojet with protection means for a fuel injection device, an injection device and a protective plate for the turbojet

Methods and apparatus for cooling turbine engine combustor ignition devices

Burner for a gas turbine engine

Primary fuel nozzle having dual fuel capability

Fuel supply method and fuel supply system for fuel injection device

Fuel supply method and fuel supply system

Combustion liner cap assembly for combustion dynamics reduction

Burner arrangement for the annular combustion chamber of a gas turbine

Turbine fuel ring assembly

Gas turbine engine combustor can with trapped vortex cavity

Thermal isolation device for liquid fuel components

Methods and apparatus for operating gas turbine engine combustors

Fueling passage array sealing system and method of use

Gas turbine engine including a fuel nozzle having vortex generators

Combustor including a heat shield for a turbine engine

Axial fuel stage injector creating air curtain

Combustor body and axial fuel stage immersed injectors additively manufactured with different materials

Adjustable gaseous fuel injector

Fuel injector assembly for gas turbine engine with fuel, air and steam injection

Cooling turbine engine fuel-air mixer with steam

Combustor with tangential fuel and air flow

Combustor having thermally compliant bundled tube fuel nozzle

Halo ring fuel injector for a gas turbine engine

Dome structure providing a dome-deflector cavity with counter-swirled airflow

Fuel injector systems for torch igniters

Integrated combustion nozzle having a unified head end

Combustor nozzle and method for modifying the combustor nozzle