METHOD AND DEVICE FOR ORDER ANALYSIS

OPTICAL SENSING

TEST BENCH FOR AT LEAST ONE VEHICLE COMPONENT AND METHOD FOR GENERATING A TRANSLATIONAL LOAD

METHOD FOR CALCULATING ACTUAL CONTACT RATIO OF THERMOPLASTIC RESIN GEAR, METHOD FOR DERIVING COEFFICIENT OF FRICTION OF THERMOPLASTIC RESIN GEAR, METHOD FOR PREDICTING TOOTH ROOT TEMPERATURE OF THERMOPLASTIC RESIN GEAR, AND METHOD FOR PREDICTING SERVICE LIFE OF THERMOPLASTIC RESIN GEAR

SETUP OF A ROLLING TEST FOR SPUR GEARS

Method for measuring the wear of an involute spline of a hub drive with planetary gearbox

NV LEVEL DETERMINATION SYSTEM AND NV LEVEL DETERMINATION METHOD

FAULT SYMPTOM DIAGNOSTIC SYSTEM AND FAULT SYMPTOM DIAGNOSTIC METHOD

METHOD FOR DETERMINING THE EXPECTED NOISE EMISSIONS OF A GEAR PAIR

END-OF-LINE METHOD FOR DETERMINING EFFICIENCY OF A VEHICLE MODULE

ACOUSTIC SENSOR MONITORING FOR TURBINE ENGINE GEARBOX

ANALYSIS OF THE GEAR CUTTING PROCESS BY MEANS OF A ROLLING TEST

EXPERIMENTAL SYSTEM AND METHOD FOR SIMULATING A GEAR TRANSMISSION OF AN ELECTRIC MULTIPLE UNIT UNDER WHEEL-RAIL EXCITATION

GEAR TRAIN MECHANICAL OPERATION EXPERIMENTAL INSTRUMENT

METHOD AND PRODUCTION SYSTEM

Gear fault diagnosis method based on joint weighted envelope noise-resistant correlation of sub-signals

GEAR DEFECT DETECTION DEVICE AND GEAR DEFECT DETECTION METHOD

SYSTEM AND METHOD FOR EVALUATING VEHICLE AXLE DIFFERENTIALS

GEARBOX FAULT DETECTION METHOD AND DEVICE

FAILURE DIAGNOSIS DEVICE FOR REDUCTION GEAR, METHOD OF DIAGNOSING FAILURE, AND MECHANICAL APPARATUS PROVIDED WITH THE FAILURE DIAGNOSIS DEVICE

INSPECTION DEVICE, INSPECTION METHOD, AND VEHICLE

Abnormality diagnosis device for planetary gear speed reducer and construction machine

INSPECTION APPARATUS AND INSPECTION METHOD

DEVICE FOR MEASURING GEAR PARAMETERS WITH MANUAL GEAR ROLL TESTER

METHOD FOR MONITORING A WEAR STATE OF A GAS PATH CONTROL DEVICE, CONTROL DEVICE FOR CARRYING OUT SUCH A METHOD AND ENERGY CONVERSION DEVICE HAVING SUCH A CONTROL DEVICE

METHOD FOR TRAINING GEARBOX FAULT DIAGNOSIS MODEL, AND GEARBOX FAULT DIAGNOSIS METHOD

MODIFIED MASTER GEARWHEEL

METHOD FOR MONITORING THE WEAR OF A POWERTRAIN OF AN ELECTRIC VEHICLE AND ELECTRIC VEHICLE IMPLEMENTING SAID METHOD

FIXING PLATFORM FOR USE WITH INDUSTRIAL ROBOT AND METHOD OF AUTOMATICALLY MEASURING BACKLASH OF GEAR

ROLLING TEST-CONTROLLED DRESSING

GEAR IDENTIFICATION TOOL FOR VEHICLE PARTS

Method, system, device and medium for measuring gear tooth profile roughness

End-connecting type hydraulic loader

ROLL TESTING MACHINE FOR ROLL TESTING TOOTHINGS

Method for capturing a load spectrum and load-spectrum capturing device

Method for automatic detection of wear, gear damage and/or bearing damage on a gearbox

SYSTEMS AND METHODS TO MONITOR SEATS FOR DIAGNOSTICS, PROGNOSTICS AND DEGRADATION

OVERLOAD PROTECTION FOR DRIVE TEST STANDS

Method for automatic detection of wear, gear damage and/or bearing damage on a gearbox

SYSTEM FOR DETERMINING A TORQUE BETWEEN TWO ROTATING MEMBERS

Method for checking or testing the profile of the path of contact of involute helical cylindrical gears

AUTOMATED NONCONTACT SENSOR POSITIONING

DIAGNOSTIC APPARATUS, MOVING BODY, COMPUTER READABLE STORAGE MEDIUM, AND DIAGNOSTIC METHOD

SYSTEMS AND METHODS FOR DETERMINING MECHANICAL WEAR IN A CRYSTAL PULLER

METHOD AND SYSTEM FOR GEARBOX FAILURE DETECTION USING RADIOACTIVE COMPONENTS

DRIVE AND METHOD FOR OPERATING A DRIVE

METHOD AND DEVICE FOR PLAUSIBILIZING A SENSOR SIGNAL OF A SINGLE-TRACK VEHICLE

ROLLABLE ELECTRONIC DEVICE INCLUDING GEAR ASSEMBLY

RECOGNITION OF TOOTH CONTACT WITH A LUMINESCENT AGENT

Accelerated life test method for speed reducer of industrial robot

Smart factory system for vehicles

PREDICTIVE MODELING OF HEALTH OF A DRIVEN GEAR IN AN OPEN GEAR SET

Computer-Implemented Method, Device, Computer Program, and Computer-Readable Medium for Identifying a Gearwheel that Induces Vibrations in a Transmission

Utilizing a gear box break-in assembly

Vehicle control system for optimizing energy consumption

Device and method for diagnosing failure of speed reducer

SYSTEMS AND METHODS FOR PREDICTING AND UPDATING GEARBOX LIFETIME EXPECTANCY

Analytic system and method for testing gears

Reusability determination method for gear and reusability determination system for gear

Diagnosis apparatus

Method for monitoring an epicyclic gear train by progressive mechanical wave measurement

METHOD AND DEVICE FOR MEASURING A TOOTHING

Method for monitoring a gearbox driven by an electric motor

Method for correcting a time-dependent measurement signal of a motor transmission unit as well as a method for detecting wear and/or damage of the same by means of this correction method

Method and system for monitoring a status of a reducer of a gas turbine

ABNORMALITY PREDICTION DEVICE, FEEDING DEVICE, AND ABNORMALITY PREDICTION METHOD

System and method for pulley wear monitoring

Gear inspection system

Detection method for radial deformation of flexspline of harmonic reducer under installation eccentricity state

Strain wave gear and elastic transmission element therefor, robotic arm and method for arranging a strain gauge

Imaging system for assessing integrity of metal motive parts in industrial plants

Inspection device and inspection method for speed variator

Method for determining the transmission backlash of a transmission

Method for identifying a change in the operating behavior of a crankshaft drive of a motor vehicle

System for evaluating correctness of gear mesh and automatically updating results on a production system

METHOD AND SYSTEM FOR FAULT DIAGNOSIS OF GEARBOX OF WIND TURBINE GENERATOR

Fatigue damage degree estimation device and method

SYSTEMS AND METHODS FOR DETECTION AND ANALYSIS OF FAULTY COMPONENTS IN A ROTATING PULLEY SYSTEM

Method of identifying a fault in a system of gears in a wind turbine

System for separating periodic frequency of interest peaks from non-periodic peaks in machine vibration data

Experimental system and method capable of simulating non-inertial system of gear transmission

Method and system for direct determination of theoretical damage to at least one component of a device

Condition monitoring for plain bearings by means of structure-borne noise

Inspection apparatus and inspection method

Method and system for detecting damage to a component

Method for calculating estimation value of mechanical characteristic parameter

TESTING APPARATUS FOR GEARS

Method for acoustically influencing toothed wheels

Sensor and sensor fixing structure

Measurement of toothed articles on a composite machine tester platform utilizing a non-contact sensor

Gear positioning device, stress measurement system, gear positioning method, and stress measurement method

Method and apparatus for identifying gear tooth numbers in a gearbox

Magnetic field sensor having unequally spaced magnetic field sensing elements

Work vehicle

METHOD AND DEVICE FOR DETERMINING MAXIMUM GEAR RATIO OF TRANSMISSION

Feed shaft and worm gear abnormality determination system

Electronic valve actuator with predictive self-calibrating torque controller

TEST BENCH FOR TOOTHINGS

Linear actuator with testable cone no-back and torque limiter

Intelligent rolling contact fatigue testing system and testing method therefor

Gear inspection apparatus and gear inspection method using the same

Failure diagnosis device for reduction gear, method of diagnosing failure, and mechanical apparatus provided with the failure diagnosis device

Method and apparatus for monitoring a rotatable member

Automatic transmission shifting performance evaluation

Automatic System for Processing and Testing Gears

Test coupon and test method

Planetary gear arrangement

TOOTHING TEST STAND

Method for straightening of radial run-out faults or linearity faults on elongate workpieces, and measuring device, straightening machine, and straightening system thereof

TESTING APPARATUS FOR GEARS

System and method for measuring motor bearings consumption of railway vehicles

Method of identifying a fault in a system of gears in a wind turbine

System and method for monitoring wear on a gearbox of a wind turbine

GEAR MACHINING DEVICE WITH CENTERING DEVICE

Ultrasonic probe adapter, ultrasonic testing method and ultrasonic testing system

PROCESS AND DEVICE FOR THE SUPERVISION OF THE KINEMATICS OF AN EPICYCLIC PLANETARY GEARBOX

Systems and methods for detection and analysis of faulty components in a rotating pulley system

Device with a tactile system and with a contactlessly operating sensor, and corresponding method and use thereof

Systems and methods for detecting damage in rotary machines

Measurement of worm gears

State monitoring system of gear device and state monitoring method

TOOTHING ARRANGEMENT AND METHOD FOR DETERMINING CHARACTERISTICS OF A TOOTHING ARRANGEMENT

Sensorized mechanical component

Planet gear having failure mode optimized for continued planetary gear system operation

Method of avoiding gear tooth interference in a planetary gear system

Check method of worm gears

Gearbox monitoring

Method for inspecting ball screw mechanism, apparatus for inspecting ball screw mechanism, and method for inspecting steering system

Method for Early Error Detection in a Drive System, a System for Early Error Detection, Wind Generator Comprising the System and Use of the System

Three Pins Axial Worm Inspection Device

Condition monitoring method

Driveline test fixture having compliant collar

Rotation pulsation generating mechanism

Driven gear diagnostic system and method

Diagnostic method, system and device for a rotorcraft drive system

Device and method for measuring three-dimensional contact stiffness of spur gear based on rough surface

Techniques for monitoring gear condition

Measuring system and measuring method for detecting variables on planetary carriers of a planetary gear train

Method and device for testing gearwheels

Contact measurement on the tooth flank of a gearwheel workpiece

Magnetic transmission park position sensor

Abnormality determining device and abnormality determining method

Flexible automation cell for performing secondary operations in concert with a machining center and roll check operations

Gearbox torque measurement system

Apparatus and method for measuring backlash

Sensing system and method

Flexible automation cell for performing secondary operations in concert with a machining center and roll check operations

Test Unit for Quantitative Analysis of a Contact Pattern on a Tooth Surface of a Gear, Method for Quantitative Analysis and use of the Test Unit

Method for operating a plurality of measuring machines and apparatus comprising multiple measuring machines

APPARATUS FOR MEASURING GEAR TRANSMISSION ERROR

Method and apparatus for excitation of gear rattle

Monitoring system for predicting gearbox lifespan

Failure detection mechanism for electric actuator, and electric actuator having the same

Apparatus and method for protecting drive shaft

Techniques for monitoring gear condition

Method for detecting and/or preventing grind burn

Gear sensing based on differential/asymmetric inductive sensing

Gear transmission and usage measuring device for measuring usage of gear transmission

Method and apparatus for inspecting cluster gears

Torque estimation for work machine power train

Flexible automation cell for performing secondary operations in concert with a machining center and roll check operations

System for operating a top drive assembly for subterranean operations

System and method for improving a workpiece

Automated nital etch inspection system

Planetary gear carrier pack transmission error inspection device

Gear detection switch

Method and apparatus for combining torque and angle representation

Method and tool for checking alignment between gears

Apparatus for the lapping or testing of gears

Gear fault detection

Error measuring method of gear

Drive hub for planet pinion carrier freeness check

Gear inspection apparatus

Monitoring engine components

Apparatus for measuring backlash in specimen gear

Method and a system for the purpose of condition monitoring of gearboxes

METHOD AND ARRANGEMENT FOR MONITORING GEARWHEELS DURING OPERATION

Torsion tester

System and method for improving a workpiece

Method and apparatus for measuring a manufacturing deviation in an external gear

Wear-monitoring of a gearbox in a power station

Method and apparatus for manufacturing vehicle power transmission device

Gear shift shock evaluation apparatus and evaluation method of the same

Method for dynamically checking the teeth of a part and checking device using said method

Gear Position Detecting Device and Cycle Computer

Gearbox test rig

System and method for blind fault detection for rotating machinery

Translocation-simulating loading apparatus for gear grinding machine with shaped grinding wheel and detection method for stiffness distribution

Test stand for the dynamic testing of an individual running gear component or of a complete axle system of a motor vehicle, and also a method for testing upon said test stand

Method of calibrating gear measuring device

Method and apparatus for determining quality of a gearing system

System and method for developing fault diagnostics and failure prognosis of spline wear in a drive system

Gear measuring method

Method of measuring and testing a workpiece and gear cutting machine

DETECTING DEVICE, IMAGE FORMING APPARATUS, COMPUTER PROGRAM PRODUCT, AND DETECTING SYSTEM

METHOD FOR EARLY DETECTION OF DAMAGE IN A MOTOR VEHICLE TRANSMISSION

Sideband energy ratio method for gear mesh fault detection

Method and system for evaluating a play

Method and a device for detecting abnormal changes in play in a transmission unit of a movable mechanical unit

Mechanical assembly provided with means for monitoring for a structural anomaly, a gearbox provided with such a mechanical assembly, and a method of monitoring for a structural anomaly

System, method and computer program for remotely testing system components over a network

Method for the measurement of the stock of a gear

METHOD FOR TESTING A DRIVE ARRANGEMENT AND ACCORDINGLY EQUIPPED CONVERTER

Method for adjusting meshing position of hypoid gear

System and method for gearbox health monitoring

Method and system for estimating contact patterns

Method for optimally operating transmissions

Method and device for measuring gear tooth wear

Torque measuring method and apparatus for motor-operated valve

Gear pair evaluation apparatus, gear pair evaluation program, and gear pair whose tooth surfaces are evaluated using the apparatus and program

METHOD OF DIAGNOSING ABNORMALITY OF REDUCTION GEAR AND APPARATUS FOR CARRY OUT THE METHOD

Oil temperature prediction and vehicle protection

Dynamic gear inspection system

Device and method for combined testing of gears

Method for estimating damage to an object, and method and system for controlling the use of the object

Gear pattern inspection system

Dynamic gear train analysis

Method for estimating damage to an object, and method and system for controlling the use of the object

Forced harmonic vibration master gear

Apparatus and method for function testing

Gear checker apparatus

Coupling device between a test box and a companion test box for back-to-back planetary testing

High-power and heavy-load back-to-back planetary gear test platform

Backlash measurement system for an electromechanical actuator

Systems and methods for in-situ monitoring of gearbox

Fault frequency matching of periodic peaks in spectral machine data

Vibration measurement and analysis

Transmission adapter apparatus and method

Vibration measurement and analysis

Determining an angular position of an output gear