SYSTEMS AND METHODS FOR NON-DESTRUCTIVELY INSPECTING COMPONENTS

INSPECTION ROBOT WITH SLED ASSEMBLY INCLUDING FIRST AND SECOND PORTIONS THAT MOVE INDEPENDENTLY

METHOD FOR THE INTERNAL INSPECTION OF STORAGE TANKS

AN ADAPTABLE AEROSOL-GENERATING SYSTEM AND METHOD

MEASURING THE CONDITION OF A LINEAR ASSET

SECOND HARMONIC GENERATION FOR ESTIMATING THE STATE OF CHARGE OF LITHIUM-ION BATTERIES

SYSTEMS, METHODS AND APPARATUS FOR TEMPERATURE CONTROL AND ACTIVE COOLING OF AN INSPECTION ROBOT

CLEANING ROBOT FOR SENSING AND CLEANING FLOOR AND CONTROL METHOD THEREFOR

IDENTIFYING MATERIAL USED IN WATER PIPES USING ACOUSTIC WAVE ANALYSIS

Method of extracting one or more rare and precious metals from a substrate comprising the same

EXTRACTED PETROLEUM AND BIOFUEL FEEDSTOCK BLENDING APPARATUS AND METHOD OF USE THEREOF

ENGAGEMENT ASSEMBLIES FOR SYNCHRONIZING ROTATIONAL AND TRANSLATIONAL MOTION WITH ULTRASONIC MEASUREMENTS

SYSTEMS, METHODS, AND APPARATUS FOR PROVIDING INTERACTIVE INSPECTION MAP FOR INSPECTION ROBOT

Device for Measuring Thickness of Pipelines

PRESSURE BLASTER FOR EFFICIENT BIOFOULING REMOVAL OF UNDERWATER STRUCTURES

PROBE MODULE OF ULTRASOUND TEST DEVICE

METHOD FOR FABRICATING AN ENCLOSURE OF A PHOTOACOUSTIC DETECTING DEVICE

METHOD FOR INSPECTING A POWERPLANT COMPONENT

FILTERING OUT BACKGROUND NOISE FROM MEASUREMENT DATA DURING DEFECT INSPECTION

INSPECTION SCOPE WITH VIBRATION ISOLATOR FOR TRANSDUCER

MATERIAL ESTIMATION METHOD, MATERIAL ESTIMATION SYSTEM, MATERIAL ESTIMATION DEVICE, AND RECORDING MEDIUM

ROBOTIC INSPECTION TOOL FOR USE IN CONFINED SPACES AND METHOD OF INSPECTION

DIGITAL TWIN SCENARIOS MOVING SCANNING DEVICE

METHOD OF PREDICTING ACOUSTIC PERFORMANCE OF POROUS POLYMER MATERIAL AND PROGRAM TO PERFORM SAME

SYSTEMS, METHODS, AND APPARATUS FOR PROVIDING INTERACTIVE INSPECTION MAP FOR INSPECTION ROBOT

SYSTEMS, METHODS, AND APPARATUS FOR ULTRA-SONIC INSPECTION OF A SURFACE

SOFT ROBOT FOR NON-DESTRUCTIVE TESTING

PIPE INSPECTION DEVICE

ACTUATOR, LIQUID DISCHARGE HEAD, LIQUID DISCHARGE UNIT, LIQUID DISCHARGE APPARATUS, AND ULTRASONIC DIAGNOSTIC APPARATUS

DETECTION APPARATUS FOR DETECTING DEFECT IN THREE-DIMENSIONAL (3D) STACK AND METHOD OF DETECTING DEFECT IN 3D STACK BY USING THE SAME

APPARATUS AND METHOD FOR ANOMALY LOCALIZATION IN BRANCHED WAVEGUIDES

TRANSMISSION TERMINAL, MEASUREMENT SYSTEM, AND CONTROL METHOD

DUCT THICKNESS MEASUREMENT DEVICE SIMULTANEOUS SUBMARINES AT MULTIPLE POINTS

MIRROR CONNECTING UNIT FOR AN INDUSTRIAL UT SYSTEM

ULTRASONIC SENSOR PROTECTION TUBE DEVICE FOR VISUALIZING INTERIOR OF INVISIBLE MEDIUM UNDER HIGH TEMPERATURE AND HIGH RADIATION

Method and Apparatus for Evaluating Soft Material Properties Using Nonlinear Vibrations

MEASUREMENT APPARATUS

SYSTEM AND METHOD FOR PERFORMING CHARACTERIZATION OF A SAMPLE USING MULTI-WAVELENGTH LASER ACOUSTICS

NON-DESTRUCTIVE BATTERY PACK INSPECTION AND IMAGING

ROBOTIC WEDGE MANIPULATION FOR DEPOSIT OR REMOVAL

HALBACH ARRAY MAGNET, ELECTROMAGNETIC ULTRASONIC SENSOR, DEFECT MEASUREMENT APPARATUS, DEFECT MEASUREMENT METHOD, METAL MATERIAL MANUFACTURING METHOD, METAL MATERIAL QUALITY CONTROL METHOD, METAL MATERIAL MANUFACTURING FACILITY, SOLIDIFICATION POSITION MEASUREMENT APPARATUS, SOLIDIFICATION POSITION MEASUREMENT METHOD, AND CASTING FACILITY

Sensor assembly for monitoring the structure of a housing structure

FREE HAND ACOUSTIC PROBE TRACKING

PRODUCT QUALITY MEASURING APPARATUS

ULTRASONIC INSPECTION APPARATUS AND ULTRASONIC INSPECTION METHOD

AN ULTRASOUND INSPECTION PROBE FOR A MACHINE TOOL

ULTRASOUND INSPECTION PROBE AND CORRESPONDING INSPECTION METHOD

Ultrasonic Apparatus

ULTRASONIC TESTING PROBE, COUPLANT DELIVERY SYSTEM, AND ULTRASONIC TESTING APPARATUS

COMPENSATION OF ENVIRONMENTAL AND OPERATIONAL CONDITIONS IN ULTRASONIC TESTING OF STRUCTURES

METHOD AND DEVICE OF IDENTIFYING AND LOCATING PCCP BROKEN WIRE SIGNAL

ACOUSTIC TRANSDUCER AND DEVICES COMPRISING THE SAME

SEMICONDUCTOR DEFECT INSPECTION METHOD AND APPARATUS

ULTRASONIC FLAW DETECTION SYSTEM

Wear Sensor

METHOD FOR MEASURING THICKNESS, ROUGHNESS AND INTERFACE STIFFNESS OF COATING LAYER USING ULTRASONIC PHASE DERIVATIVE SPECTRUM

ACOUSTIC VIBRATIONS METHOD TO DETECT DISEASES AND PREDICT SHELF LIFE AND MATURITY OF COMMODITIES

SYSTEMS AND METHODS FOR ACOUSTIC ANALYSIS OF SEI FORMATION IN BATTERIES

EXCITATION DEVICE, INSPECTION SYSTEM, AND EXCITATION METHOD

SYSTEM, APPARATUS AND METHOD FOR IMPROVED LOCATION IDENTIFICATION WITH PRISM

DELAY LINE AND METHOD FOR ULTRASONIC INSPECTION OF A WORKPIECE

A METHOD OF AUTOMATICALLY TESTING THE SENSITIVITY OF A TYPE OF DUAL-CRYSTAL ULTRASONIC PROBE (ALSO CALLED ULTRASONIC TRANSDUCER) AND THE DETECTION SYSTEM WITH THE PROBES

ULTRASONIC IMAGING DEVICE WITH PROGRAMMABLE ANATOMY AND FLOW IMAGING

METHOD AND APPARATUS FOR SAFETY MONITORING OF CRACK IN BLADE GROOVE OF IN-SERVICE NUCLEAR TURBINE ROTOR

IDENTIFYING MATERIAL USED IN WATER PIPES USING ACOUSTIC WAVE ANALYSIS

VARYING THE COUPLANT OR RATIO OF MIXTURES INSIDE OR OUTSIDE OF AN ENCLOSED OR OPEN NON-DESTRUCTIVE TESTING DEVICE

MOTORIZED CUFFING MECHANISM FOR ULTRASOUND INSPECTION

Ultrasound probe for inspection of a component at a temperature above 150°C and associated inspection method

HALF RING GEAR MECHANISM FOR ULTRASOUND INSPECTION

Determination of Peaking of Pipes

IMPROVED CONTACTLESS DETECTION OF VIBRATIONS IN METAL BELTS

SYSTEM, METHOD, AND APPARATUS FOR INSPECTING A SURFACE

SYSTEMS, METHODS, AND APPARATUS FOR ULTRA-SONIC INSPECTION OF A SURFACE

APPARATUS AND METHOD FOR ANALYZING ROAD SURFACE CONDITION BASED ON VEHICLE NOISE

FLAW CLASSIFICATION DURING NON-DESTRUCTIVE TESTING

System, apparatus and method for improved location identification with prism

WATER WALL BOILER TUBE GUIDED WAVE SENSOR

CYCLE LIFE PERFORMANCE DETERMINATION FOR BATTERIES USING ACOUSTIC SIGNAL ANALYSIS

Systems and methods for robotic inspection with simultaneous surface measurements at multiple orientations

ANOMALY DETECTION DEVICE, ANOMALY DETECTION METHOD, AND RECORDING MEDIUM

SYSTEM FOR MONITORING DEFECTS WITHIN AN INTEGRATED SYSTEM PACKAGE

METHOD AND SYSTEM USING PRE-QUALIFIED REFERENCE DATA IN VIBRATION SYSTEM

SONIC INSPECTION DEVICE, SONIC INSPECTION METHOD, AND HOLDER FOR SONIC INSPECTION DEVICE

SYSTEM AND METHOD FOR REMOTELY MONITORING HEALTH OF A STRUCTURE

METHOD AND SYSTEM FOR DEFECT SENSING WITHIN A FUSION WELD

Inspection robots with a payload engagement device

Method for Testing the Quality of Ultrasonic Welded Joints

SEAL FAILURE DETECTION SYSTEM AND METHODS

INTELLIGENT SAMPLING OF BATTERY CELLS FOR IN-DEPTH QUALITY EVALUATION AND ANALYSIS

APPARATUS AND METHOD FOR TESTING SENSITIVITY CONSISTENCY OF ACOUSTIC EMISSION SENSOR

SYSTEM AND METHOD FOR ULTRASONIC TESTING AND WELD INSPECTION

Automatic impedance matching for EMAT

APPARATUS AND METHOD FOR ULTRASONIC INSPECTION OF A MATERIAL

SYSTEM FOR MONITORING DEFECTS WITHIN AN INTEGRATED SYSTEM PACKAGE

METHOD AND SYSTEM USING PRE-QUALIFIED REFERENCE DATA IN VIBRATION SYSTEM

MEASURING THE CONDITION OF A LINEAR ASSET

System and Method for Analyzing a Material

INSPECTION ROBOT WITH REMOVEABLE INTERFACE PLATES AND METHOD FOR CONFIGURING PAYLOAD INTERFACES

COMPACT, PORTABLE PHASED ARRAY SCANNING HOUSING

ULTRASONIC INSPECTION DEVICE

METHODS AND APPARATUS FOR ACOUSTIC METROLOGY

ELASTIC WAVE AND TENSILE DAMAGE TESTING SYSTEM OF ROCK COUPLED WITH SEEPAGE IN DEEP EARTH COMPLEX ENVIRONMENT

Smart plug for fin fan tubes on-line corrosion monitoring

PIPE INSPECTION DEVICES AND SYSTEMS, AND METHODS OF USING SAME

ULTRASONIC WALL THICKNESS MEASUREMENT SYSTEM HAVING A HIGH TEMPERATURE ULTRASONIC TRANSDUCER FOR MONITORING THE CONDITION OF A STRUCTURAL ASSET

DETECTION DEVICE, DETECTION SYSTEM, AND PROPAGATING MEMBER

INTERNAL STATE DETECTING SYSTEM AND METHOD FOR ENERGY STORAGE DEVICES

QUALITY EVALUATION METHOD AND QUALITY EVALUATION DEVICE

ULTRASOUND DEVICE AND METHOD

METHOD AND SYSTEM FOR DETECTING CHARACTERISTICS OF A SURFACE PORTION ON AN AIRCRAFT

DEVICE MONITORING SYSTEMS AND METHODS

FIXTURING MECHANISM WITH LOAD SENSORS FOR ACOUSTIC TESTING OF BATTERY SAMPLES

INSPECTION ROBOT

EVALUATION METHOD FOR CORROSION DAMAGE EVOLUTION OF UNDERWATER CONCRETE STRUCTURES

ULTRASONIC INSPECTION APPARATUS

Payload with adjustable and rotatable sensor sleds for robotic inspection

Inspection robot having adjustable resolution

Apparatus and method for characterizing soft materials using acoustic emissions

Sensor module, sensor module installation device, and mounting method of sensor module

Acoustic field diffusion type electromagnetic acoustic transducer with improved periodic permanent magnets

ULTRASONIC TESTING DEVICE

CONTACTLESS DETERMINATION OF COATING FEATURES

SYSTEM AND METHOD FOR MONITORING HEAT TRANSFER EQUIPMENT

MODE CONVERSION REFLECTOR

Sound inspection apparatus and sound inspection method

METHOD FOR DETECTING RAIL FRACTURE USING IMAGE TRANSFORMATION OF VIBRATION DATA MEASURED BY DISTRIBUTED ACOUSTIC SENSING TECHNOLOGY

SYSTEMS AND METHODS FOR COLLECTING ACOUSTIC DATA ON BATTERY CELLS TO DETECT DEFECTS

MAGNETOSTRICTIVE GUIDED WAVE SENSOR AND METHOD FOR PREPARING MAGNETOSTRICTIVE COATING

ROLLER SEARCH UNIT HAVING INTEGRATED DIGITAL CIRCUITRY FOR DETECTING RAIL DEFECTS

Systems for ultrasonic inspection of a surface

COMPREHENSIVE REAL-TIME CHARACTERIZATION OF ULTRASONIC SIGNATURES FROM NONDESTRUCTIVE EVALUATION OF RESISTANCE SPOT WELDING PROCESS USING ARTIFICIAL INTELLIGENCE

RESONANT ACOUSTIC RHEOMETRY FOR CHARACTERIZATION OF SOFT VISCOELASTIC MATERIALS

WELDING ASSESSMENT DURING WELDING PROCESS

Measuring low-frequency casing guided waves to evaluate cement bond condition behind casing in the presence of a tubing

IDENTIFICATION APPARATUS, IDENTIFICATION METHOD, AND IDENTIFICATION PROGRAM

Assisting device for blade detection

NON-DESTRUCTIVE TESTING OF A MECHANICAL PART MADE OF A POLYCRYSTALLINE MATERIAL

APPARATUS AND METHOD FOR ANALYZING ROAD SURFACE CONDITION BASED ON VEHICLE NOISE

Image forming apparatus that detects status of transport belt that transports recording medium

METHOD FOR IDENTIFYING PRESTRESS FORCE IN SINGLE-SPAN OR MULTI-SPAN PCI GIRDER-BRIDGES

PROCESSING DEVICE, PROCESSING SYSTEM, PROCESSING METHOD, AND STORAGE MEDIUM

SOUND-ASSISTED CRACK PROPAGATION FOR SEMICONDUCTOR WAFERING

INSPECTION ROBOTS AND METHODS FOR INSPECTION OF CURVED SURFACES WITH SENSORS AT SELECTED HORIZONTAL DISTANCES

ULTRASONIC PROBE AND ULTRASONIC INSPECTION DEVICE

UAV for continuous ultrasound testing (UT) scans

Acoustic Detection of Defects in a Pipeline

Method for measuring deviation angle of fatigue microcrack based on nonlinear ultrasound

Inspection robots with swappable drive modules

ULTRASONIC TESTING APPARATUS WITH VARIABLE FREQUENCY

Active Temperature Compensation Technique for Structural Health Monitoring Sensors

Super-resolution photoacoustic microscopy

Acoustic vector sensor

ULTRASONIC PATCH TRANSDUCER FOR MONITORING THE CONDITION OF A STRUCTURAL ASSET

Detection of blockage in a porous member

Acoustic garbage classification method using one-dimensional convolutional neural network (1D-CNN)

Robotic systems for rapid ultrasonic surface inspection

Systems and methods for robotic inspection with simultaneous surface measurements at multiple orientations with obstacle avoidance

Robotic systems for ultrasonic surface inspection using shaped elements

Robotic inspection devices for simultaneous surface measurements at multiple orientations

Robotic systems for surface inspection with simultaneous measurements at multiple orientations

Systems for assessment of weld adjacent heat affected zones

Systems, methods, and apparatus for ultra-sonic inspection of a surface

Ultrasonic-resilience value testing apparatus for inorganic non-metal plate

Non-destructive testing method for flexural strength of fine ceramic, apparatus, and storage medium

Inspection robots with configurable interface plates

Inspection robots with independent drive module suspension

Inspection robot and methods utilizing coolant for temperature management

Systems, methods and apparatus for temperature control and active cooling of an inspection robot

Methods and apparatus for verifiable inspection operations

Inspection robots and methods for inspection of curved surfaces

Methods and inspection robots with on body configuration

Inspection robots with independent, swappable, drive modules

Inspection robots with a payload engagement device

Inspection robots with center encoders

Inspection robot with removeable interface plates and method for configuring payload interfaces

Systems for reprogrammable inspection robots

INSPECTION ROBOTS WITH FLEXIBLE WHEEL/MOTOR POSITIONING

Ultrasonic testing device and testing method

Ultrasound inspection system and method

Scanner having flexible probe

STATE ESTIMATION DEVICE, STATE ESTIMATION METHOD, AND RECORDING MEDIUM

ULTRASONIC TRANSMISSION DEVICE AND WAVE CONTROL METHOD

System and method for scanning an object using an array of ultrasonic transducers

Digital twin model inversion for testing

Ultrasonic testing probe, couplant delivery system, and ultrasonic testing apparatus

Non-destructive inspection of test objects on a workpiece

HIGH OUTPUT ACOUSTIC SYSTEM FOR DIRECT FIELD ACOUSTIC TESTING

Ultrasonic phased array detection device for flaw detection of parallel tubes

Ultrasonic inspection device and inspection method

Measurement probe edge guide tool

Two methods of determining permeabilities of naturally fractured rocks from laboratory measurements

Ultrasonic flaw detection device and method for controlling same

NON-DESTRUCTIVE TESTING AND CLEANING APPARATUS

Method for testing secondary battery and method for manufacturing secondary battery including the same

Method for detecting position anomaly of test object, control system, testing system, robot system, testing robot, and programming device

Digital twin model inversion for testing

Contactless odometer

Assessing at least one structural feature of an anti-biofouling arrangement

Apparatus and method for acoustic modeling of defects in composite materials using calibration panels formed by additive manufacturing

Ultrasonic sensor for guided wave testing

Steam/hot water device monitoring

Temperature-controllable large-size geotechnique true triaxial multi-field coupling test system and test method

Composite parts that facilitate ultrasonic imaging of layer boundaries

Measuring system for monitoring the material parameters and/or homogeneity of a suspension conveyed through a channel

Ultrasonic in-situ automatic detection system for creep cracks on inner wall of hydrogen production furnace tube

Methods and systems for evaluating a target using pulsed, energetic particle beams

Ultrasonic imaging device with programmable anatomy and flow imaging

Ultrasonic flaw detection device, ultrasonic flaw detection method, and ultrasonic flaw detection program

IMPROVEMENTS RELATING TO WIND TURBINE BLADE MANUFACTURE

Ultrasonic testing for additive manufactured components

METHOD FOR EVALUATING PIPE CONDITION

METHOD FOR EVALUATING PIPE CONDITION

Pulse stretching technique for laser bond inspection, laser ultrasonic inspection, and laser peening

Signal processing

System for providing power to a stationary underwater control station

Testing device

System, method, and apparatus for inspecting a surface

Apparatus, system, and method for ultrasonic inspection of a variable angle joint

ULTRASONIC MONITORING SYSTEM OF THE NUCLEAR REACTOR ABOVE CORE SPACE

Material property testing system and method

Digital twin model inversion for testing

Photo-acoustic tomography defect testing system and method

Gas matrix piezoelectric ultrasound array transducer

Ultrasonic testing system of dual robot arms and method thereof

Acoustic vector sensor

Ultrasound probe with row-column addressed array

Ultrasound probe with row-column addressed array

Ultrasonic imaging device with programmable anatomy and flow imaging

ULTRASONIC PROBE

Virtual sensing apparatus of structural vibration and operating method thereof

Method for ultrasonic inspection of structure having radiused surface using multi-centric radius focusing

SYSTEM FOR INSPECTING A REPAIR OR JOINT CONSISTING OF A COMPOSITE MATERIAL APPLIED TO A STRUCTURE

Real-time reconfiguration of phased array operation

Multi-frequency wireless sensor

Robot arm device and method for transferring wafer

Predictive integrity analysis

Systems and methods for monitoring health of core samples

Flexible sensor with piezoelectric array applied for weld defect detection based on feature guided waves and its testing method

Device and method for detecting faults of a structure

Full-scale dynamic detection of bacterial biofilm formation using MGZNO nanostructure modified multifunctional sensors

Detection device, detection system, and detection method

Bonding interface evaluation method and bonding interface evaluation device

Electro-acoustic sensors for remote monitoring

Quality inspection method and quality inspection system for unvulcanized rubber material, and production method and production system for unvulcanized rubber material

Robot system and method for non-destructive testing

System and method for monitoring a change over time of a physical medium using ultrasonic wave sensing elements embedded therein

Method for inspecting a weld

System and method for detecting a modification of a compound during a transient period

Weld seam testing chain

Acoustic inspection method, acoustic inspection device, and couplant

Apparatus and method for detecting objects in water bodies

Apparatus and method for acoustic modeling of defects in composite materials using calibration panels formed by additive manufacturing

Arrays of acoustic transducers for physical analysis of batteries

METAL FABRICATION INSPECTION AND RECORD SYSTEM

Electronic device and method for simulating an ultrasonic response of a metal part, associated testing electronic system and method and computer program

Fluidic component, ultrasonic measurement device having a fluidic component of this type, and applications of the ultrasonic measurement device

Sound-assisted crack propagation for semiconductor wafering

Control method of probe with ultrasonic phased array transducers in hinge array

Computer-implemented processing for non-destructive evaluation of wooden specimen

Standoff inspection using geometry-informed full-wavefield response measurements

Ultrasonic testing device and method

Mobile automated non-destructive inspection system

Small-diameter wire/rod/tube ultrasonic detection system without end blind area

Attachment mechanisms for stabilization of subsea vehicles

Ultrasonic inspection of extents of voids or the like in heated material using fluid blowing

DETECTION OF BLOCKAGE IN A POROUS MEMBER

Automated ultrasonic inspection of elongated composite members using single-pass robotic system

DETECTION OF BLOCKAGE IN A POROUS MEMBER

Apparatus, method, and system for identifying, locating, and accessing addresses of a piping system

INSPECTION SYSTEM, MOBILE ROBOT DEVICE, AND INSPECTION METHOD

Method for extracting signal in presence of strong noise

Robot arm device and method for transferring wafer

Detection of blockage in a porous member

System and method for detecting failed electronics using acoustics

Strain and acoustic wave testing device and method for high-temperature rock sample

Method for testing of a weld, and ultrasonic probe arrangement

System, apparatus and method for providing an inspection map

Electro-acoustic sensors for remote monitoring

Inspection robot with stability assist device

Systems, methods, and apparatus for tracking location of an inspection robot

Systems and methods for driving an inspection robot with motor having magnetic shielding

In-service and trenchless repair method for disconnection of drainage pipeline

System, method, and apparatus for rapid development of an inspection scheme for an inspection robot

Enhanced guided wave thermography inspection systems and methods of using the same

Corrosion rate monitoring using ultrasound, and associated systems and methods

SYSTEM FOR IN-LINE MEASUREMENT OF MILL LINER WEAR AND MILL BOLT TENSION BY MEANS OF AN ECHOGRAPHIC SENSOR INSERTED INTO THE THREADED END OF BOLTS

Underwater pipeline inspection crawler

Underwater pipeline inspection crawler

Three dimensional detection device, surface detection method and production line apparatus using the same

Inspection apparatus and inspection method

Inspection method using a perching UAV with a releasable crawler

Automation methods for UAV perching on pipes

Perching UAV with releasable crawler

Articulated magnet-bearing legs for UAV landing on curved surfaces

Crawler vehicle with automatic probe normalization

Sensor system

Non-destructive detecting method for weld residual stress and a probe using the same

Damage detection system and method for detecting damage in fastened structures

Insertable waveguide to improve acoustic signal transmission in wooden specimen

Laser ultrasound scanning for visualizing damage or irregularities