197683 ⎘
Recording by magnetisation or demagnetisation of a record carrier; Reproducing by magnetic means; Record carriers therefor; Recording on, or reproducing or erasing from, magnetic tapes, sheets, e.g. cards, or wires magnetic tapes on longitudinal tracks only, e.g. for serpentine format recording using stationary heads
Sub-classes:MAGNETIC TAPE, MAGNETIC TAPE CARTRIDGE, AND MAGNETIC TAPE APPARATUS
#2BLENDED MEDIA HEAD IN A STORAGE SYSTEM
#3Signal processing device, magnetic tape drive, magnetic tape, magnetic tape cartridge, program, signal processing method, and magnetic tape manufacturing method
#4Magnetic disk device having heater to adjust spacing between magnetic disk and magnetic head
#5Signal processing device, magnetic tape drive, magnetic tape, magnetic tape cartridge, program, signal processing method, and magnetic tape manufacturing method
#6Magnetic tape device
#7STORAGE CONTROL APPARATUS AND STORAGE CONTROL METHOD
#8Signal processing device, magnetic tape cartridge, magnetic tape reading apparatus, processing method of signal processing device, operation method of magnetic tape reading apparatus, and non-transitory computer-readable storage medium
#9Magnetic tape device, magnetic tape, and magnetic tape cartridge
#10Buffered writing of datasets and end longitudinal positions (end LPOSs) on a magnetic recording tape and validating the end LPOSs during reading of a later dataset thereafter
#11Multichannel tape head module having thermally settable transducer pitch and method of setting pitch thereof
#12Calibration of writer offset using media dimensional stability
#13Tape drive system with tape surface inspection unit
#14Tape head and system having asymmetrical construction
#15Protecting a sensitive device from corrosion
#16System and method for write protecting portions of magnetic tape storage media
#17Apparatus having low-contact-pressure head-tape interface
#18Tape head and system having asymmetrical construction
#19Tape drive system with tape surface inspection unit
#20Filled-gap magnetic recording head and method of making
#21Magnetic head having arrays of tunnel valve read transducers with designated minimum hard bias magnet thickness to free layer thickness ratios
#22Mass production of multichannel current perpendicular to plane head modules via preferred milling
#23Tape head and system having asymmetrical construction
#24Protecting a sensitive device from corrosion
#25Methods for fabricating magnetic writer structures using post-deposition tilting
#26Tape apparatus and control device
#27Abrasion test methods and devices
#28System and method for write protecting portions of magnetic tape storage media
#29Magnetic recording head having protected reader sensors and near zero recession writer poles
#30Differing magnetic read sensors on a magnetic head
#31Monitoring of residual encrypted data to improve erase performance on a magnetic medium
#32Mass production of multichannel current perpendicular to plane head modules via preferred milling
#33Method of forming magnetic recording head having protected reader sensors and near zero recession writer poles
#34Systems and methods for protecting a sensitive device from corrosion
#35Tape library apparatus and information management method
#36Miniskirt tape head having quasi-statically tilted transducer arrays
#37Erasing recorded data by utilizing read head and write head
#38Tape head surface with non-uniform cross-width edge profiles
#39Calibrating a tape drive
#40Cartridge for storing biosample capillary tubes and use in automated data storage systems
#41Signal processing device, magnetic information playback device, and signal processing method
#42Miniskirt tape head having quasi-statically tilted transducer arrays
#43Abrasion test methods and devices
#44Miniskirt tape head having quasi-statically tilted transducer arrays
#45Miniskirt tape head having quasi-statically tilted transducer arrays
#46Miniskirt tape head having quasi-statically tilted transducer arrays
#47Module with coating for abrasion testing
#48Protecting a sensitive device from corrosion
#49Filled-gap magnetic recording head and method of making
#50Magnetic tape control apparatus, recording medium storing a control program, and method
#51High performance cartridge format
#52Monitoring of residual encrypted data to improve erase performance on a magnetic medium
#53Universal magnetic recording head chip
#54Multi-format read drive
#55Tape drive buffer utilization
#56Systems and methods for protecting a sensitive device from corrosion
#57Material for use in a TMR read gap without adversely affecting the TMR effect
#58Magnetic recording head having quilted-type coating
#59Tape drive buffer utilization
#60High performance cartridge format
#61Tension transients suppression during acceleration and/or deceleration for storage tape drive
#62Access to migrated tapes
#63Magnetic recording head having protected reader sensors and near zero recession writer poles
#64Tension transients suppression during acceleration and/or deceleration for storage tape drive
#65Tape drive buffer utilization
#66Method of forming magnetic recording head having protected reader sensors and near zero recession writer poles
#67Monitoring of residual encrypted data to improve erase performance on a magnetic medium
#68HARDENED LAYER ON A DRIVE HEAD
#69Magnetic recording head having quilted-type coating
#70Magnetic tape partitioning format for use in linear recording of fixed partitions
#71Abrasion test methods and devices
#72Tape head length adjustment
#73Methods for fabricating magnetic writer structures using post-deposition tilting
#74Systems and methods for protecting a sensitive device from corrosion
#75SELF-CONTAINED MAGNETIC TAPE DRIVE AND COMBINED MULTI-PART TAPE SYSTEM
#76SELF-CONTAINED MAGNETIC TAPE DRIVE AND COMBINED MULTI-PART TAPE SYSTEM
#77Erasure and servowriting of magnetic storage media having perpendicular anistropy
#78Cartridge for storing biosample capillary tubes and use in automated data storage systems
#79Magnetic head having polycrystalline coating
#80Apparatus and method for controlling data writing to a tape medium
#81Methods for fabricating magnetic transducers using post-deposition tilting
#82Determining a reference waveform used by a correlator in a servo channel
#83System and method for write protecting portions of magnetic tape storage media
#84Magnetic recording medium and magnetic signal reproduction method
#85Methods for providing persistent lubrication to a magnetic tape head and systems thereof
#86Writing data to a tape
#87Tape Cartridge Formatted with Increased Data Redundancy for Testing and Repair of a Defective Tape Drive
#88Varying data reader response
#89Determining a reference waveform used by a correlator in a servo channel
#90Material for use in a TMR read gap without adversely affecting the TMR effect
#91Magnetic writer structures formed using post-deposition tilting
#92Methods for fabricating magnetic transducers using post-deposition tilting
#93Self-aligned double flux guided TMR sensor
#94APPARATUS AND METHOD FOR PROCESSING MAGNETIC TAPE MEDIA
#95MAGNETIC HEAD AND METHOD OF MANUFACTURING THE SAME, LINEAR TAPE DRIVE APPARATUS, AND MAGNETIC RECORDING AND REPRODUCTION METHOD
#96Systems and methods for protecting a sensitive device from corrosion
#97Magnetic tape driving apparatus
#98Method and system for compensating for tape deformation
#99Magnetic Recording Medium, Linear Magnetic Recording and Reproduction System and Magnetic Recording and Reproduction Method
#100Recording data simultaneously at two depths of a tilted magnetic medium
#101Recording data simultaneously at two depths of a tilted magnetic medium
#102Filled-gap magnetic recording head and method of making
#103Magnetic signal reproduction system employing a spin-valve MR head developed for high-density recording and a spin-valve MR head and magnetic signal reproduction method for reproducing magnetic signals in which a spin-valve MR head is employed
#104TAPE HEAD HAVING A PROTECTIVE LAYER AND A METHOD OF APPLYING A PROTECTIVE LAYER TO A TAPE HEAD
#105Head actuator design for a low profile tape drive
#106Magnetic tape head with limited ranges of tape wrap angle and distance between first and second edges
#107Tape head read/write module
#108Multi-channel head
#109Method of controlling write and read of data for tape recording apparatus
#110Head actuator design for a low profile tape drive
#111Magnetic recording head
#112Tape head read/write module
#113Data storage device for recording to magnetic thread
#114Recessed tape servo head to create an equipotential tape bearing surface