Spin-Orbit Torque Assisted Magnetic Write Head Structure For Perpendicular Magnetic Recording

HEAT-SINK STRUCTURE IN MAGNETIC STACK, AND RELATED ARTICLES, SYSTEMS, AND METHODS

Novel DFH Bulge by Heat Sink Design

HEAT-SINK STRUCTURE IN MAGNETIC STACK, AND RELATED ARTICLES, SYSTEMS, AND METHODS

Spin Wave Assisted MAMR Recording Head

Spin Injection Assisted Magnetic Recording

Perpendicular Magnetic Recording Writer With Tunable Pole Side Bridge Design

Dynamic DC Field Compensator for MAMR Recording Head

Spin-Orbit Torque Assisted Magnetic Write Head Structure For Perpendicular Magnetic Recording

Magnetic Flux Guiding Device With Spin Torque Oscillator (STO) Film Having Negative Spin Polarization Layers In Assisted Writing Application

THIN-FILM CRYSTALLINE STRUCTURE WITH SURFACES HAVING SELECTED PLANE ORIENTATIONS

Dynamic DC field compensator for MAMR recording head

Magnetic head with multilayer configuration between magnetic poles and magnetic recording device

Magnetic head with multilayer configuration between magnetic poles and magnetic recording device

Perpendicular Magnetic Recording Writer With Tunable Pole Side Bridge Design

Spin injection assisted magnetic recording

Perpendicular magnetic recording writer with tunable pole side bridge design

Cobalt-boron (CoB) layer for magnetic recording devices, memory devices, and storage devices

Spin torque oscillator with enhanced spin polarizer

Tape head with side-shielded writers and process for making same

Magnetic flux guiding device with spin torque oscillator (STO) film having negative spin polarization layers in assisted writing application

Magnetic recording head having a magnetic pole and a write shield

Heatsink structures for heat-assisted magnetic recording heads

MAMR recording head with SAF trailing shield notch and/or bump

Magnetic recording devices using virtual side shields for improved areal density capability

Writer with adaptive side gap

Magnetic recording device and magnetic recording method utilizing assisted magnetic recording

Magnetic recording device including a magnetic head including a stacked body between magnetic poles

Magnetic recording devices having negative polarization layer to enhance spin-transfer torque

Spin injection assisted magnetic recording

Thin-film crystalline structure with surfaces having selected plane orientations

On head microelectronics for write synchronization

Magnetic recording devices having negative polarization layer to enhance spin-transfer torque

Dual writer for advanced magnetic recording

MAGNETIC SENSOR MANUFACTURING

Heatsink structures for heat-assisted magnetic recording heads

In-situ NFT pre-treatment to accumulate optically transparent material on NFT to improve reliability

Spin-torque oscillator with multilayer seed layer between the write pole and the free layer in a magnetic recording write head

Magnetic recording head with non-magnetic conductive structure

Magnetic head including stacked body having plural of intermediate layers and magnetic recording device including same

MAGNETIC HEAD SLIDER, MAGNETIC HEAD ASSEMBLY AND MAGNETIC DISC DEVICE

Dual writer for advanced magnetic recording

Double loop heater

Writer with narrower high moment trailing shield

Magnetic recording devices using virtual side shields for improved areal density capability

Magnetic head including plural magnetic layers and plural intermediate layers and magnetic recording device

Magnetic head having specific distance between magnetic pole, stacked body, and first shield, and magnetic recording device including same

Spin injection assisted magnetic recording

Heatsink structures for heat-assisted magnetic recording heads

Writer with HMTS (high moment trailing shield) aligned with spin layer

Writer with HMTS (high moment trailing shield) aligned with spin layer

Magnetoresistive effect element, magnetic head, sensor, high-frequency filter, and oscillator

Reversed mode spin torque oscillator with shaped field generation layer

On head microelectronics for write synchronization

Magnetic write head with write-field enhancement structure including a magnetic notch

Heat sink structure for microwave-assisted magnetic recording (MAMR) head

Magnetic recording device and magnetic head

Atomic layer deposition systems, methods, and devices

Disk device

MAMR write head with thermal dissipation conductive guide

Multichannel tape head module having thermally settable transducer pitch and method of setting pitch thereof

Slider gas-bearing surface designs to mitigate effects of smear in heat-assisted magnetic recording

Detecting media defects

Disk drive thermally assisted magnetic recording head having a slider and a tilted light incident surface

Double loop heater

Magnetic recording and reproducing device having a magnetic recording head including a magnetic flux control layer between a main magnetic pole and an auxiliary magnetic pole

Magnetoresistive effect element, magnetic head, sensor, high-frequency filter, and oscillator

Spin transfer torque device with oxide layer beneath the seed layer

Spin-orbit torque induced magnetization switching in a magnetic recording head

Near-field transducer for heat assisted magnetic recording comprising of thermally stable material layer

Spin-torque oscillator with multilayer seed layer between the write pole and the free layer in a magnetic recording write head

MAMR write head with thermal dissipation conductive guide

Spin transfer torque (STT) device with multilayer seed layers for magnetic recording and memory

Double ridge near-field transducers

Heat assisted magnetic recording with exchange coupling control layer

Write coil cooling arrangement at air bearing surface

Devices including metal layer

Dual spin-orbit torque oscillator in magnetic recording

Magnetic recording head with specified thickness and saturation magnetic flux density products for STO magnetic layers

Single Rh layer optical field enhancer with pre-focusing structures

Devices including at least one multilayer adhesion layer

Magnetoresistive effect element, magnetic head, sensor, high-frequency filter, and oscillator

Detecting media defects

On head microelectronics for write synchronization

Magnetic tape abrasivity measurement

Magnetic recording apparatus having magnetic flux control part and magnetic recording head having magnetic flux control part

Assisted magnetic recording medium including a pinning layer and magnetic storage device

Heat-assisted removal of head contamination

Heat-assisted removal of head contamination

Magnetic head with spin torque oscillator connection configuration

Heater design with locally decreased resistance area for fly height control

Heat assisted magnetic data recording head with heat sink

Heat assisted magnetic data recording head with heat sink

Devices including a near field transducer (NFT) including peg and disc from different materials

Slider utilizing multiple transducer sets

Magnetic sensor manufacturing

Magnetic recording head with specified thickness and saturation magnetic flux density products for STO magnetic layers

Detecting media defects

Methods of forming portions of near field transducers (NFTS) and articles formed thereby

Thermally-assisted magnetic recording head having symmetric optical side shields

On head microelectronics for write synchronization

MAGNETIC DEVICES WITH VARIABLE OVERCOATS

Bond pad sharing for powering multiple writers of a recording head

Near field transducer (NFT) including peg and disc of different materials

Near-field transducer with adjacent high-refractive index material layer

Multilayer element including base multilayer body, magnetic sensor and microwave assisted magnetic head

Thermal assisted magnetic recording head with plasmon generator

Heater design for fly height control

Perpendicular magnetic recording with multiple antiferromagnetically coupled layers

Write coil cooling arrangement at air bearing surface

Free-standing reflector usable in heat assisted magnetic recording technology

Magnetic head, disk drive with the same and method of manufacturing magnetic head

Thermally-assisted magnetic recording head including a main pole and a plasmon generator

Method to coat NFT area with highly thermal conducting material in HAMR structure

Resistive temperature sensors for improved asperity, head-media spacing, and/or head-media contact detection

Near field transducer (NFT) including peg and disc of different materials

Devices including a near field transducer (NFT) including peg and disc from different materials

Thermally robust near-field transducer peg

Near-field transducer for heat assisted magnetic recording comprising of thermally stable material layer

Near-field transducer with enlarged region, peg region, and heat sink region

Devices including at least one multilayer adhesion layer

Devices including metal layer

Devices including near field transducer and adhesion layer

Methods of forming portions of near field transducers (NFTS) and articles formed thereby

Near-field transducer with multiple heat sinks

Microwave assisted magnetic recording head and magnetic recording device having the same

Asperity and head-media contact detection using multi-stage temperature coefficient of resistance sensor

Writer core incorporating thermal sensor having a temperature coefficient of resistance

Laser array for heat assisted magnetic recording

Near-field transducer peg encapsulation

Asymmetric MAMR head with self-aligned spin torque oscillator along flare edge for shingled magnetic recording

Optical reflectors for use with a near-field transducer

Magnetic recording head, magnetic head assembly, magnetic recording apparatus, and magnetic recording method

Waveguide core layer with reduced downtrack thickness proximate a near-field transducer

Planar plasmon generator with thickened region and peg region

Near field transducer and heat sink design for heat assisted magnetic recording

Magnetic head including two contact sensors

Heat sink layer along an aperture of a near-field transducer

Noble metal surrounded magnetic lip and heat sink for heat assisted magnetic recording head

Multiple heaters independently controlling clearance of two or more read transducers

Magnetic head for perpendicular magnetic recording including a heater

Near-field light generator including a waveguide and a plasmon generator

Devices including near field transducer and adhesion layers

Magnetic head with integrated write driver

Microwave-assisted recording head with stable oscillation

Electrically insulating magnetic material for a read head

Thermally-assisted magnetic recording head having a heat sink

Substrate for suspension, process for producing the same, suspension for magnetic head, and hard disk drive

Magnetic adhesion layer and method of forming same

Near-field transducer with enlarged region, peg region, and heat sink region

Near field transducer with isolated peg

Near field transducer and heat sink design for heat assisted magnetic recording

Near-field transducer peg encapsulation

Magnetic devices including near field transducer

Contact detection using laser modulation

Heat assisted magnetic recording head having thermal sensor with high-TCR transparent conducting oxide

Magnetic devices including low thermal conductivity portion

Write portion, thermally assisted magnetic head slider, head gimbal assembly, and hard disk drive with the same

Magnetic recording head, magnetic head assembly, magnetic recording apparatus, and magnetic recording method

Magnetic devices with variable overcoats

Plasmon generator and thermally-assisted magnetic recording head having the same

Thin film structure with controlled lateral thermal spreading in the thin film

HARDENED LAYER ON A DRIVE HEAD

Magnetic recording head with spin torque oscillator

Heater assembly and method of heating

Laser modulation for magnetic recording apparatus

Thin-film magnetic head and method of making where the head includes an antireflection film covering a leading shield

MAGNETIC HEAD HAVING A CONTACT DETECTION SENSOR

Write yoke with stabilizing layer

Magnetic sensor manufacturing

Substrate nitrogen plasma treatment for softer CoFe main pole writer formation

Spin-torque oscillator (STO) for microwave-assisted magnetic recording (MAMR) and methods of use thereof

Magnetic head and disk drive with the same

Magnetic disk device, magnetic disk evaluation apparatus, and magnetic head

Preheat feature for thermally assisted recording

Energy-assisted magnetic recording head and systems thereof with environmental conditions control

Methods and devices including multiple resistive heating elements

Thin-film magnetic head, method of manufacturing the same, head gimbal assembly, and hard disk drive

Hard disk drive with write assist based on detected conditions

Magnetic head having a thermal fly-height control (TFC) structure under a flat lower shield

Perpendicular magnetic recording write head with ladder network compensation circuitry on slider body for write current overshoot at write current switching

Biasing structure for write element domain control in a magnetic writer

Gradient index optical waveguide coupler

Plasmonic transducer having two metal elements with a gap disposed therebetween

Head assembly with head-media spacing control

Magnetic head having a contact sensor

Magnetic recording device

Method for detecting protrusion height of magnetic head slider having thermally assisted head

MAGNETIC RECORDING HEAD

Methods of manufacturing a transducer

Method for active control of spacing between a head and a storage medium

Magnetic head with self compensating dual thermal fly height control

Magnetic recording head and magnetic recording apparatus

MAGNETIC HEAD, HEAD GIMBAL ASSEMBLY WITH THE SAME, AND DISK DRIVE

Magnetic head having a contact detection sensor

Electrodeposition of FeCoNiV films with high resistivity and high saturation magnetization

Three-dimensional magnetic recording and reproducing apparatus including a plurality of magnetic layers having different resonant frequencies

Thin film structure with controlled lateral thermal spreading in the thin film

Data storage heater systems with diodes

Spin oscillator or magnetic recorder including multiple injection layers in the magnetic recording head

Magnetic recording method using microwave assisted head

Resistive temperature sensors for improved asperity, head-media spacing, and/or head-media contact detection

Asperity and head-media contact detection using multi-stage temperature coefficient of resistance sensor

Head transducer with multiple resistance temperature sensors for head-medium spacing and contact detection

Resistance temperature sensors for head-media and asperity detection

OSCILLATOR IN WHICH POLARITY IS CHANGED AT HIGH SPEED, MAGNETIC HEAD FOR MAMR AND FAST DATA TRANSFER RATE HDD

Modified field generation layer for microwave assisted magnetic recording

Magnetic sensor having improved resistance to thermal stress induced instability

Head gimbal assembly and disk drive with the same

Thermal fly height control magnetic recording head having a novel heating element geometry

Spin torque oscillator and magnetic recording head and magnetic recording device mounted with the spin torque oscillator

Magnetically damped return pole in a magnetic head

Recording head for heat assisted magnetic recording with diffusion barrier surrounding a near field transducer

Extended cavity VCSEL mounted to substrate with electrical and thermal contact to substrate and optical power directed toward substrate

MAGNETIC HEAD SLIDER AND MAGNETIC DISK UNIT USING SAME

MAGNETIC RECORDING HEAD AND MAGNETIC RECORDING APPARATUS

Magnetic recording and reproduction device and flying height control method

Magnetic device containing a heater

Head comprising a crystalline alumina layer

Thin film magnetic tape head including gap between substrate and closure

Thermally-assisted magnetic recording head having heat radiation layer and interposed layer

Magnetic head slider and magnetic disk drive

Perpendicular magnetic recording write head and system with improved spin torque oscillator for microwave-assisted magnetic recording

Thermally assisted magnetic recording head

Magnetic head for perpendicular recording and disk drive with the same

MAGNETIC HEAD WITH INTEGRATED WRITE DRIVER

Head-slider including thin-film magnetic-recording head having reduced thermal protrusion

Thin film structure with controlled lateral thermal spreading in the thin film

Joint design of thermally-assisted magnetic recording head and patterned media for high optical efficiency

Device for generating high frequency magnetic fields in a rest-frame of a magnetic medium

On head microelectronics for write synchronization

Disk drive, head-slider and method for controlling clearance of a read element and a write element in the disk drive

Methods and devices to control write pole height in recording heads

Recording head heater systems with two electrical connections

Contact type thin film magnetic head with heater for distance control

Delay line on a movable substrate accessing data storage media

MAGNETIC HEAD AND DISK APPARATUS PROVIDED WITH THE SAME

Perpendicular magnetic recording head including non-magnetic protruding layer

Multilayered waveguide having protruded light-emitting end

Insertion under read shield for improved read gap actuation in dynamic flying height

PATTERNED MAGNETIC RECORDING HEAD WITH TERMINATION PATTERN

MAGNETIC RECORDING DEVICE WITH AN INTEGRATED MICROELECTRONIC DEVICE

Magnetic head and information storage device

DISK APPARATUS WITH CONTACT-TYPE HEAD

MAGNETIC HEAD, MAGNETIC DISK DEVICE, AND MANUFACTURING METHOD OF MAGNETIC HEAD

Magnetic recording head and magnetic recording apparatus

Biasing structure for write element domain control in a magnetic writer

THIN-FILM MAGNETIC-RECORDING HEAD INCLUDING BUILT-IN ACOUSTIC-EMISSION SENSOR

HEAD EVALUATING METHOD AND DEVICE, AND INFORMATION STORAGE APPARATUS

Magnetic recording head, magnetic head assembly, magnetic recording apparatus, and magnetic recording method

MAGNETIC HEAD AND INFORMATION STORAGE APPARATUS

MAGNETIC HEAD AND MAGNETIC DISK DEVICE

Magnetic recording head and magnetic recording apparatus

Substrate for suspension, process for producing the same, suspension for magnetic head, and hard disk drive

Thin-film magnetic head, method of manufacturing the same, head gimbal assembly, and hard disk drive

Magnetoresistance effect element, magnetic head and magnetic recording and/or reproducing system

Method of making a write head lapping guide about aligned to a non-magnetic layer surrounding a write pole

NEUTRALIZING FLYING HEIGHT SENSITIVITY OF THERMAL POLE-TIP PROTRUSION OF MAGNETIC SLIDER

Head assembly having a sensing element

Recording head for reducing side track erasure

Write head with common mode termination resistor

Method of manufacturing a magnetic head

METHOD OF PRODUCING THIN FILM MAGNETIC HEAD

Thin film magnetic head

DATA STORAGE DEVICE

Thermally stable high anisotropic high magnetic moment films

MAGNETIC RECORDING DEVICE

Magnetic head design having reduced susceptibility to electrostatic discharge from media surfaces

Grounding structure of TMR and GMR heads with a flying on-demand heater

MAGNETIC HEAD AND STORAGE APPARATUS

MULTILAYER STITCHED YOKE FOR A HIGH DATA RATE PERPENDICULAR WRITE HEAD

Magnetic head slider for absorbing vibrations

MAGNETIC HEAD

MAGNETIC MEDIA HAVING A SERVO TRACK WRITTEN WITH A PATTERNED MAGNETIC RECORDING HEAD

Disk drive device, manufacturing method thereof, and method for setting heater power value for a heater for adjusting a clearance

Magnetic head slider

MAGNETIC HEAD, MAGNETIC RECORDING MEDIUM, AND MAGNETIC RECORDING APPARATUS USING THE MAGNETIC HEAD AND MAGNETIC RECORDING MEDIUM

Magnetic recording head and magnetic recording apparatus

Magnetic head for perpendicular magnetic recording and method of manufacturing the same, the magnetic head including pole layer and two shields sandwiching the pole layer

Magnetoresistance effect element, magnetic head and magnetic recording and/or reproducing system

Magnetic disk drive for controlling flying height of magnetic head

Wire-assisted magnetic write device with a gapped trailing shield

Wire-assisted magnetic write device with phase shifted current

Head integrated circuit and storage apparatus including the same

Wire-assisted magnetic write device with low power consumption

Using inductance to measure writer spacing in perpendicular magnetic recording

Control unit, storage unit, and method for manufacturing storage unit

Perpendicular magnetic recording head and method of manufacturing same

Magnetic recording head with spin oscillation device and magnetic recording apparatus including the magnetic recording head

Perpendicular magnetic recording head

Perpendicular magnetic recording head

Magnetic head device including heat-conducting layer for transferring heat to slider body

Thin-film magnetic head that locally projects an element part toward a recording medium by thermal expansion

Magnetic head slider with diffusion stop films each of which is disposed between the associated terminal portion and lead portion or between the associated lead portion and seed film

Thin film magnetic head in which thermal protrusion is suppressed and method of forming the same

Magnetic head with plated magnetic film formed on PdNi alloy electrode film

Non-magnetic contact enhancement feature

Disk drive and control method thereof

Disk drive apparatus and method of adaptively controlling flying height of magnetic head therein

Thin film magnetic head having thermal expansion layer for suppressing thermal protrusion