Fixture for locating wind turbine equipment on foundation prior to tower installation

Apparatus for sealing tube plates of batteries

BIPOLAR PLATE FOR FUEL CELL AND METHOD FOR MANUFACTURING SAME

Method for manufacturing catalyst layer and method for manufacturing membrane electrode assembly

Probe card assembly and kit, and methods of making same

Method of peeling thin film device and method of manufacturing semiconductor device using peeled thin film device

Lithium secondary battery and method of manufacturing same

Method of preparing cathode containing iron disulfide for a lithium cell

Reformed battery grids

POSITIVE ELECTRODE FOR NON-AQUEOUS ELECTROLYTE BATTERY, NEGATIVE ELECTRODE FOR NON-AQUEOUS ELECTROLYTE BATTERY, SEPARATOR FOR NON-AQUEOUS ELECTROLYTE BATTERY, AND NON-AQUEOUS ELECTROLYTE BATTERY USING THEM

NONAQUEOUS ELECTROLYTE BATTERY CONTAINING A NEGATIVE ELECTRODE OF LITHIUM-TITANIUM COMPOSITE OXIDE, BATTERY PACK AND VEHICLE

Electrode protection in both aqueous and non-aqueous electrochemical cells, including rechargeable lithium batteries

APPARATUS AND METHOD FOR COATING A PASTE CONTAINING A WATER-REPELLENT SUBSTANCE, AND METHOD FOR MANUFACTURING A FUEL CELL

ELECTROLYTE MEMBRANE FOR FUEL CELL AND METHOD OF MANUFACTURING THE SAME, MEMBRANE ELECTRODE ASSEMBLY AND FUEL CELL

Electrochemical reactor units and modules and systems composed of them

SOLID OXIDE REVERSIBLE FUEL CELL WITH IMPROVED ELECTRODE COMPOSITION

Membrane/electrode assembly with multilayered cathode catalyst for polymer electrolyte fuel cells

Cell unit for a fuel cell

Battery with enhanced safety

Battery with leads

METHOD AND APPARATUS FOR PRODUCING A SOLAR CELL MODULE WITH INTEGRATED LASER PATTERNING

Porous Ceramic Thin Film

Variable trailing edge section geometry for wind turbine blade

Printed circuit board, method of fabricating printed circuit board, and semiconductor device

PM rotor having radial cooling slots and corresponding production method

Wind turbine with a drive train

WORKPIECE CONTACT PADS WITH ELEVATED RING FOR RESTRICTING HORIZONTAL MOVEMENT OF TERMINALS OF IC DURING PRESSING

Semiconductor package and methods of manufacturing the semiconductor package

Peel-resistant semiconductor device with improved connector density, and method of manufacturing the same

Fast P-I-N photodetector with high responsitivity

Organic-semiconductor-based infrared receiving device

Anode active material with improved electrochemical properties and electrochemical device comprising the same

METHOD FOR BALL GRID ARRAY (BGA) SOLDER ATTACH FOR SURFACE MOUNT

Electrochemically active composition, methods of making, and uses thereof

System For Recycling Printed Circuit Boards

Sputtering apparatus and method of manufacturing solar battery and image display device by using the same

Thin film batteries and methods for manufacturing same

Electronic carrier board applicable to surface mount technology

Method of making a circuit structure

Multi-coated electrode and method of making

Method for passivating a substrate surface

Hybrid photovoltaic cell module

NITRIDED BARRIER LAYERS FOR SOLAR CELLS

LAMINATE STRUCTURES FOR HIGH TEMPERATURE PHOTOVOLTAIC APPLICATIONS, AND METHODS RELATING THERETO

Polymer electrolyte fuel cell, electrolyte material therefore and method for its production

Method of forming an electronic device using a separation technique

SOLAR CELL SPIN-ON BASED PROCESS FOR SIMULTANEOUS DIFFUSION AND PASSIVATION

Non-aqueous electrolyte battery and method of manufacturing the same

Surface modification agents for lithium batteries

Plate assembly, core and lithium ion battery

Lithium-ion battery

Battery tab and packaging frame design

Method for evaluating internal short-circuit of battery, device for evaluating internal short-circuit of battery, battery, battery pack and their manufacturing methods

Pole bridge for a battery

Battery assembly

END PLATE FOR FUEL CELL STACK AND METHOD FOR MANUFACTURING THE SAME

Separator Material for Polymer Electrolyte Fuel Cells and Process of Producing the Same

SOLE POLYELECTROLYTE FILM AND PROCESS FOR PRODUCING SAME, AND FUEL CELL

Cell unit for a fuel cell and method for manufacturing the same

TUBE-SHAPED SOLID POLYMER FUEL CELL AND METHOD FOR PRODUCING TUBE-SHAPED SOLID POLYMER FUEL CELL

BI-ELECTRODE SUPPORTED SOLID OXIDE FUEL CELLS HAVING GAS FLOW PLENUM CHANNELS AND METHODS OF MAKING SAME

Membrane electrode assembly for fuel cell, method for making the same, and fuel cell system including the same

Polymer electrolyte fuel cell and manufacturing method for electrode-membrane-frame assembly

Composite membranes having a hydrophilic material and a conductive material susceptible to dehydration and their use in electrochemical cells

Bipolar plate coating architecture for fuel cells and methods of making and using the same

METHOD FOR AVOIDING GASEOUS IMPURITY INCLUSIONS IN AT LEAST ONE GAS CHAMBER OF A FUEL CELL DURING AN IDLE PERIOD AND FUEL CELL EQUIPPED WITH MEANS FOR CARRYING OUT THE METHOD

HYBRID ELECTRONIC DEVICE INCLUDING SEMICONDUCTOR CHIP AND FUEL CELL, METHOD OF FABRICATING THE SAME AND SYSTEM HAVING THE SAME

Silver-coated ball and method for manufacturing same

Solar battery and manufacturing method therefor

Wind turbine, a method for servicing a main bearing unit of a wind turbine and use thereof

Non-invasive battery analysis via micro-computed tomography

SEMICONDUCTOR PACKAGE, MOUNTING CIRCUIT BOARD, AND MOUNTING STRUCTURE

Semiconductor package, method for manufacturing a semiconductor package, an electronic device, method for manufacturing an electronic device

Self-supported film and silicon wafer obtained by sintering

Methods for increasing film thickness during the deposition of silicon films using liquid silane materials

METHOD OF MAKING CONTACT TO A SOLAR CELL EMPLOYING A GROUP IBIIIAVIA COMPOUND ABSORBER LAYER

INTEGRATED THIN-FILM SOLAR CELL AND PROCESS FOR PRODUCING THE SAME

Method of Manufacturing Photoelectric Conversion Element and the Photoeletric Conversion Element

System and method of operating internal combustion engines at fuel rich low-temperature- combustion mode as an on-board reformer for solid oxide fuel cell-powered vehicles

Method for manufacturing a bipolar battery with a gasket

Method for forming a back-to-back wafer batch to be positioned in a process boot, and handling system for forming the BTB wafer batch

Method for manufacturing catalyst layer of membrane electrode assembly

Method of forming an electronic device using a separation-enhancing species

POSITIVE ELECTRODE, PRODUCTION METHOD THEREOF, AND LITHIUM SECONDARY BATTERY USING THE SAME

MULTILAYER MATERIAL BASED ON ACTIVE LITHIUM, METHOD OF PREPARATION AND APPLICATIONS IN ELECTROCHEMICAL GENERATORS

Electrode, and current collector used therefor

SECONDARY BATTERY

Rechargeable battery

Battery pack

Power storage device

Membrane electrode assembly for fuel cell and manufacturing method thereof

Fuel Cell Separator and Manufacturing Method Thereof

METALLIC BIPOLAR PLATE FOR FUEL CELL

Composite membrane

MEMBRANE AND ELECTRODE ASSEMBLY AND METHOD FOR PRODUCING THE SAME

PROCESS FOR SEALING PLATES IN A FUEL CELL

SEMICONDUCTOR SHEETS AND METHODS OF FABRICATING THE SAME

METHOD OF ATTACHING AN INTEGRATED CIRCUIT CHIP TO A MODULE

SOLDERING PAD AND CIRCUIT BOARD UTILIZING THE SAME

Wireless IC device

THIN-FILM BATTERY EQUIPMENT

Positioning of a rotor of a wind power plant

Tidal flow hydroelectric turbine

SYSTEM FOR DISPLAYING IMAGES AND FABRICATION METHOD THEREOF

Mounting structure and method for mounting electronic component onto circuit board

Surface mount adhesive, mounting structure including the same, and method for producing mounting structure

Substrate for mounting electronic component and electronic apparatus including the substrate

Solar Cell and Method for Manufacturing the Same

Method for manufacturing infrared detecting device

NONAQUEOUS ELECTROLYTE SECONDARY BATTERY AND METHOD FOR PRODUCING THE SAME

ELECTROCHEMICAL CELL, AND SYSTEM COMPRISING AT LEAST ONE ELECTROCHEMICAL CELL AND A HOUSING

Fuel Cell and Manufacturing Method of the Same

METHOD FOR PRODUCING POLYMER ELECTROLYTE MEMBRANE, POLYMER ELECTROLYTE MEMBRANE AND DIRECT METHANOL FUEL CELL

Crosslinked polymer electrolyte and method for producing same

Power Generation Cell for Solid Electrolyte Fuel Cell and Structure of Fuel Electrode Thereof

Formation process for lithium-ion batteries

Lithium ion secondary battery and a method for manufacturing same

Rotor blade of a wind energy unit

Blade transportation

Novel organic electroluminescent compounds and organic electroluminescent device using the same

Polymer membrane for a fuel cell, a method of preparing the same, and a membrane-electrode assembly fuel cell system comprising the same

METHOD OF MAKING A WIND TURBINE ROTOR BLADE

SEMICONDUCTOR PACKAGE HAVING PASSIVE COMPONENT BUMPS

Gel electrolytes for dye sensitized solar cells

Infrared detector, infrared detecting apparatus, and method of manufacturing infrared detector

CLAD MATERIAL FOR WIRING CONNECTION AND WIRING CONNECTION MEMBER PROCESSED FROM THE CLAD MATERIAL

Component assembly

Electronic carrier board

Method of manufacturing wind turbine blades comprising composite materials

Strain Balanced Multiple Quantum Well Subcell In Inverted Metamorphic Multijunction Solar Cell

Functional Device and Method for Making the Same

Refractive Index Matching in Inverted Metamorphic Multijunction Solar Cells

Insulating Glass Unit with Integrated Mini-Junction Device

Solar Cell Design and Methods of Manufacture

Method for pretreating electrochemical capacitor negative electrode, method for manufacturing the electrochemical capacitor negative electrode, and method for manufacturing electrochemical capacitor using the method for manufacturing the electrochemical capacitor negative electrode

Automated system for manufacturing part of fuel cell stack

Calcium-sodium polysulfide chemical reagent and production methods

Fuel Cell Separator Material and Process of Producing the Same

Junction formation on wafer substrates using group IV nanoparticles

Method and apparatus for achieving low resistance contact to a metal based thin film solar cell

Method for manufacturing photoelectric conversion device

Anode and secondary battery

Fuel cell separator and method for manufacturing the same

Solid lithium secondary cell, and production method therefor

Negative electrode active material for a lithium rechargeable battery and lithium rechargeable battery comprising the same

Lightweight, durable lead-acid batteries

Power storage device

Grid for Lead-Acid Battery with Electroconductive Polymer Coating

Battery packs suitable for use with battery powered appliances

Connection mechanism for fluid pipings, manufacturing method for the same, and fuel cell system including connection mechanism for fluid pipings

Stainless separator for fuel cell and method of manufacturing the same

Fuel cell

Electrolyte membrane, production method thereof, and fuel cell

Proton-conducting polymer composition and method for preparation thereof, catalyst ink containing said proton-conducting polymer composition and fuel cell including said catalyst ink

ION CONDUCTING POLYMER MEMBRANES

POROUS MEMBRANE FOR FUEL CELL ELECTROLYTE MEMBRANE AND METHOD FOR MANUFACTURING THE SAME

Fuel cell system, estimation device of amount of anode gas to be generated and estimation method of amount of anode gas to be generated

Battery pack

Metal member having precious metal plating

Method for manufacturing of a fibre reinforced laminate and of a laterally extended material which has in a first lateral direction a greater stiffness than in a second lateral direction

Process for producing hybrid nano-filament electrodes for lithium batteries

Carbon-polymer electrochemical systems and methods of fabricating them using layer-by-layer technology

Process for producing organic electroluminescent element and organic electroluminescent display device

ORGANIC LIGHT EMITTING DEVICE AND MANUFACTURING METHOD THEREOF

ORGANIC LIGHT EMITTING DIODE DISPLAY AND MANUFACTURING METHOD THEREOF

Fuel Cell Separator Material and Process of Producing the Same

3-D stacking of active devices over passive devices

Semiconductor device

Zero-reflow TSOP stacking

Electronic device

Surface-mountable electronic device

Method for manufacturing a transparent conductive electrode using carbon nanotube films

Transfer substrate, method of manufacturing the same and method of manufacturing an organic electroluminescent element

Photovoltaic devices including self-assembling fullerene derivatives for improved efficiencies

CONDUCTIVE COMPOSITIONS AND PROCESSES FOR USE IN THE MANUFACTURE OF SEMICONDUCTOR DEVICES

METALLIC FOIL SUBSTRATE AND PACKAGING TECHNIQUE FOR THIN FILM SOLAR CELLS AND MODULES

Polycrystalline Silicon Substrate, Method for Producing Same, Polycrystalline Silicon Ingot, Photoelectric Converter and Photoelectric Conversion Module

Composite wind turbine tower and a method for fabricating same

Circuit board and manufacturing method thereof

Method of making non-aqueous electrochemical cell

Method of making non-aqueous electrochemical cell

Polyarylene polymers and ion conducting functionalized polyarylene polymers resulting from pairing bis-diene arylenes and bis-dienophile arylenes via a diels-alder reaction

Metal alloy for electrochemical Oxidation reactions and method of production thereof

Joint structure, joining method, wiring board and method for producing the same

Circuit board and electronic device using the same

Organic semiconductor thin films using aromatic enediyne derivatives and manufacturing methods thereof, and electronic devices incorporating such films

Microcrystalline silicon deposition for thin film solar applications

METHOD FOR MAKING A SELECTIVE EMITTER OF A SOLAR CELL

Anode and method of manufacturing same, secondary battery and method of manufacturing same, and sulfone compound

Lithium secondary battery and production method of the same

Non-aqueous electrolyte secondary battery

Films for electrochemical structural elements and method for producing such films

Film-packaged electric device

Secondary battery cell, stacked secondary battery and battery assembly

High energy lithium ion secondary batteries

CAP ASSEMBLY AND SECONDARY BATTERY USING THE SAME

Method of producing separator material for polymer electrolyte fuel cell

APPARATUS FOR GENERATING HYDROGEN AND FUEL CELL POWER GENERATION SYSTEM HAVING THE SAME

Method of forming an electrode including an electrochemical catalyst layer

Water turbines with mixers and ejectors

Crystal device for surface mounting

Organic light emitting device

Wind motor with a holding device for a rotor shaft

Method and system for operating a wind energy installation

Integrated circuit and method of fabricating the same

ORGANIC LIGHT EMITTING DISPLAY AND METHOD OF MANUFACTURING THE SAME

ELECTRONIC COMPONENT MODULE

SOLAR CELL AND METHOD OF MANUFACTURING THE SAME

Solar cell, method of forming emitter layer of solar cell, and method of manufacturing solar cell

SOLAR CELL AND METHOD FOR MANUFACTURING THE SAME

Precursor ink for producing IB-IIIA-VIA semiconductors

Method for manufacturing electronic parts module

Method for manufacturing electronic parts module

Adaptive surface concentration battery charging

Process for brominating alkylthiophenes

Printed wiring board solder pad arrangement

Apparatus and methods for manufacturing thin-film solar cells

Semiconductor device and method for manufacturing the same

Apparatus and methods for manufacturing thin-film solar cells

ELECTROCHEMICAL ENERGY SOURCE, AND METHOD FOR MANUFACTURING SUCH AN ELECTROCHEMICAL ENERGY SOURCE

DIRECT MANUFACTURED FUEL CELL PLUG AND METHOD

Pouch type lithium secondary battery

MEMBRANE ELECTRODE ASSEMBLY AND FUEL CELLS OF INCREASED POWER

Assemblies for electrochemical devices

Membrane-Electrode Assembly for Direct Liquid Fuel Cell and Method of Manufacturing the Same

Method for manufacturing wind turbine blade with an integrated lightning conductor

Conical helicoid wind turbine

Vertical axis windmill with weather vane positioning

Hydraulic machine member with an abrasion-resistant reinforced edge and a hydraulic machine using this member

Semiconductor package and associated methods

DRAM module with solid state disk

Coating liquid for manufacturing electrode plate, undercoating agent, and use therof

Organic light emitting device and manufacturing method thereof

Novel organic electroluminescent compounds and organic electroluminescent device using the same

WIND TURBINE AND WIND POWER INSTALLATION

Partially underfilled solder grid arrays

Electronic Device and Method of Manufacturing Same

Continuously referencing signals over multiple layers in laminate packages

Method for manufacturing light-emitting device

Patterned photovoltaic cell

Fluid enclosure and methods related thereto

Apparatus for automatically punching and bonding MEA materials for fuel cell

Manufacturing of photovoltaic subassemblies

FLEXIBLE PHOTOVOLTAIC DEVICE

Plasma-treated photovoltaic devices

SOLAR CELL FABRICATED BY SILICON LIQUID-PHASE DEPOSITION

Apparatus and methods for manufacturing thin-film solar cells

APPARATUS AND METHODS FOR MANUFACTURING THIN-FILM SOLAR CELLS

Apparatus for simultaneous roll-to-roll wet processing of two workpieces disposed within a single chamber

Batteries and components thereof and methods of making and assembling the same

Catalytic process for the phosphonylation of high-temperature polymers

Substrates for silicon solar cells and methods of producing the same

Method of fabricating bonding structure

Method of processing a semiconductor substrate by thermal activation of light elements

Electrode assembly and secondary battery having the same

Flooded lead-acid battery and method of making the same

Bipolar battery and method of manufacturing same

Anode and secondary battery

Electrical battery comprising flexible generating elements and a system for the mechanical and thermal conditioning of said elements

Sodium ion based aqueous electrolyte electrochemical secondary energy storage device

Interconnector for a fuel cell stack and method for production

Solid oxide fuel cell stack having a glass sealant composition

POLYARYLENE BLOCK COPOLYMER AND USE THEREOF

Fuel cell module and manufacturing method thereof

Unit cell assembly, fuel cell, and method for manufacturing unit cell assembly

Conveying Device for Conveying Single Separator Plates for Fuel Cells

Levelling of root bushings on blades for wind turbines

Surface mount power module dual footprint

Wind turbine incorporated in an electric transmission tower

ROTOR FOR WIND TURBINE AND ASSEMBLING METHOD THEREOF

Mould and method for vacuum assisted resin transfer moulding

METHOD AND APPARATUS TO REDUCE PIN VOIDS

Method for forming a compound semi-conductor thin-film

Apparatus and methods of attaching hybrid vlsi chips to printed wiring boards

Tyrosinase enzyme electrode and production method thereof

Connections for electronic devices on double-sided circuit board

SOLDER BY NUMBERS, A METHOD AND SYSTEM FOR POPULATING PRINTED CIRCUIT BOARDS

Dye-sensitized photoelectric conversion device and method for manufacturing same

REUSABLE CRUCIBLES AND METHOD OF MANUFACTURING THEM

Overmolded electronic module with an integrated electromagnetic shield using SMT shield wall components

Method for texturing silicon wafers for producing solar cells

Roll-to-roll processing method and tools for electroless deposition of thin layers

Higher selectivity, method for passivating short circuit current paths in semiconductor devices

High-Throughput Printing of Semiconductor Precursor Layer From Microflake Particles

Method for manufacturing a photovoltaic module

Secondary battery

Electrochemical device

Secondary battery

High energy high power electrodes and batteries

Polymer for lithium ion secondary battery and lithium ion secondary battery using same

Lithium secondary battery and method of manufacturing the same

Electricity storage device

Lithium metal foil for battery or capacitor

Electrolyte composition for nickel-zinc batteries

Lithium rechargeable battery

Center pin for secondary battery and secondary battery having the same

Electrode assembly including film-like separator combined with ceramic separator and secondary battery having the same

Organic/inorganic composite separator and electrochemical device containing the same

Electrochemical device

Laminate type battery and battery module incorporating the laminate type battery