PLASMA-EXCLUSION-ZONE RINGS WITH PLASMA-EXCLUSION-ZONE RING NOTCHES FOR SUBSTRATE PROCESSING SYSTEMS

FOCUS RING, SUBSTRATE PROCESSING APPARATUS INCLUDING THE SAME, AND SUBSTRATE PROCESSING METHOD USING THE SAME

SELECTOR AND COMBINER FOR CONTROL LAW MODULES OF AN ADAPTIVE ENGINE

ION SOURCE, MASS SPECTROMETER AND METHOD FOR GENERATING IONS

COATING APPARATUS AND METHOD OF MANUFACTURING POSITIVE ELECTRODE

ELECTRODE PLATE AND MANUFACTURING METHOD THEREOF

LITHIUM METAL ELECTRODES

PRESODIATION METHOD FOR ANODE OF SODIUM-ION BATTERY BASED ON ELECTRODE FILM PREPARED BY DRY PROCESS

METHOD OF MANUFACTURING BATTERY CELL

NEGATIVE ELECTRODE FOR LITHIUM SECONDARY BATTERY AND METHOD FOR MANUFACTURING THE SAME

CATHODE ACTIVE MATERIAL FOR LITHIUM SECONDARY BATTERY AND LITHIUM SECONDARY BATTERY INCLUDING THE SAME

ELECTRODE ASSEMBLY, SECONDARY BATTERY, AND ELECTRICAL APPARATUS

NEGATIVE ELECTRODE FOR RECHARGEABLE LITHIUM BATTERY AND RECHARGEABLE LITHIUM BATTERY INCLUDING SAME

SYSTEMS OF MAKING SOLID-STATE BATTERIES

MANUFACTURING METHOD OF ELECTRODE PLATE, MANUFACTURING METHOD OF SECONDARY BATTERY, ELECTRODE PLATE, AND SECONDARY BATTERY

ELECTRODE PRE-LITHIATION METHOD, PRE-LITHIATED ELECTRODE FOR LITHIUM SECONDARY BATTERY, AND ELECTRODE PRE-LITHIATION DEVICE

Lithium Secondary Battery

SILICON-CARBON COMPOSITE MATERIAL AND PREPARATION METHOD THEREFOR, SECONDARY BATTERY, AND ELECTRIC DEVICE

LITHIUM SECONDARY BATTERY, BATTERY PACK AND ELECTRONIC DEVICE INCLUDING SAME

SILICON-CARBON NEGATIVE ELECTRODE MATERIAL AND PREPARATION METHOD THEREFOR

POSITIVE ELECTRODE ACTIVE MATERIAL, POSITIVE ELECTRODE PLATE, SECONDARY BATTERY, BATTERY MODULE, BATTERY PACK, AND ELECTRIC APPARATUS

ANODE ACTIVE MATERIAL, ANODE, AND SECONDARY BATTERY COMPRISING SAME

POSITIVE ELECTRODE ACTIVE MATERIAL, A POSITIVE ELECTRODE AND A LITHIUM SECONDARY BATTERY

ELECTRODE, SECONDARY BATTERY INCLUDING ELECTRODE, AND METHOD OF MANUFACTURING ELECTRODE

ANODE ACTIVE MATERIAL, AND ANODE AND LITHIUM SECONDARY BATTERY COMPRISING THE SAME

NEGATIVE ELECTRODE FOR RECHARGEABLE LITHIUM BATTERY, RECHARGEABLE LITHIUM BATTERY INCLUDING THE SAME, AND METHOD FOR MANUFACTURING NEGATIVE ELECTRODE FOR RECHARGEABLE LITHIUM BATTERY

COMPOSITE CATHODE ACTIVE MATERIAL, CATHODE AND LITHIUM BATTERY EACH CONTAINING COMPOSITE CATHODE ACTIVE MATERIAL, AND PREPARATION METHOD OF CATHODE ACTIVE MATERIAL

METHOD FOR PREPARING POSITIVE ELECTRODE MATERIAL, POSITIVE ELECTRODE MATERIAL, POSITIVE ELECTRODE PLATE, BATTERY, AND ELECTRIC APPARATUS

CATHODE ACTIVE MATERIAL COATED WITH FLUORINE-DOPED LITHIUM PHOSPHORUS OXIDE AND SULFIDE ALL-SOLID-STATE BATTERY COMPRISING SAME

Silicon Composition Material for Use as Battery Anode

NEGATIVE ELECTRODE PLATE, SECONDARY BATTERY, AND POWER CONSUMING APPARATUS

POSITIVE ELECTRODE ACTIVE MATERIAL AND METHOD FOR PRODUCING POSITIVE ELECTRODE ACTIVE MATERIAL

CATHODE ACTIVE MATERIAL FOR SECONDARY BATTERY, CATHODE FOR SECONDARY BATTERY AND LITHIUM SECONDARY BATTERY

POSITIVE ELECTRODE ACTIVE MATERIALS, POSITIVE ELECTRODES, RECHARGEABLE LITHIUM BATTERIES, AND METHODS OF PREPARING POSITIVE ELECTRODE ACTIVE MATERIALS

POSITIVE ELECTRODE FOR LITHIUM SECONDARY BATTERY, ELECTRODE ASSEMBLY, LITHIUM SECONDARY BATTERY AND MANUFACTURING METHOD OF POSITIVE ELECTRODE FOR LITHIUM SECONDARY BATTERY

POSITIVE ELECTRODE ACTIVE MATERIAL, SECONDARY BATTERY, AND VEHICLE

SECONDARY BATTERY, ELECTRONIC DEVICE, VEHICLE, AND METHOD OF MANUFACTURING POSITIVE ELECTRODE ACTIVE MATERIAL

SECONDARY BATTERY AND POWER CONSUMING APPARATUS

METHOD FOR PREPARING POSITIVE ELECTRODE MATERIAL, POSITIVE ELECTRODE MATERIAL, POSITIVE ELECTRODE PLATE, BATTERY, AND ELECTRIC APPARATUS

Electrode for Battery, and Secondary Battery Including Same

ELECTRODE ASSEMBLY INCLUDING ADHESIVE INSULATING COATING PORTION AND ELECTROCHEMICAL DEVICE INCLUDING THE SAME

CAPACITY COMPENSATION ADDITIVE AND PREPARATION METHOD THEREFOR, AS WELL AS POSITIVE ELECTRODE PLATE, BATTERY, AND ELECTRICAL APPARATUS

NON-FLUORINATED SECONDARY BATTERY

POSITIVE ELECTRODE SLURRY COMPOSITION FOR RECHARGEABLE LITHIUM BATTERY, POSITIVE ELECTRODE, AND RECHARGEABLE LITHIUM BATTERY MANUFACTURED USING SAME

ELECTRODE BINDER FOR RECHARGEABLE LITHIUM BATTERY, ELECTRODE, AND RECHARGEABLE LITHIUM BATTERY MANUFACTURED USING SAME

Binder for Secondary Battery, Negative Electrode for Secondary Battery Including the Same, and Lithium Secondary Battery Including the Same

ELECTRODE PLATE, BATTERY, AND ELECTRIC APPARATUS

ELECTRODE AND RECHARGEABLE LITHIUM BATTERY INCLUDING THE SAME

Protected Sulfur Cathode for Alkali Metal-Sulfur Secondary Battery and Manufacturing Method

NEGATIVE ELECTRODE ACTIVE MATERIAL FOR SECONDARY BATTERY, SECONDARY BATTERY, AND METHOD FOR MANUFACTURING NEGATIVE ELECTRODE ACTIVE MATERIAL FOR SECONDARY BATTERY

LITHIUM SECONDARY BATTERY

ELECTRODE AND RECHARGEABLE LITHIUM BATTERY INCLUDING THE SAME

BATTERY AND ELECTRIC APPARATUS

ANODE MATERIAL AND BATTERY

INSULATING COMPOSITION FOR RECHARGEABLE LITHIUM BATTERY, ELECTRODE AND RECHARGEABLE LITHIUM BATTERY MANUFACTURED USING SAME

ELECTRODE FOR RECHARGEABLE LITHIUM BATTERY, METHOD FOR MANUFACTURING THE SAME, AND RECHARGEABLE LITHIUM BATTERIES INCLUDING THE SAME

ELECTRODE FOR RECHARGEABLE LITHIUM BATTERY AND RECHARGEABLE LITHIUM BATTERY INCLUDING THE SAME

METAL-AIR FLOW BATTERY CELL AND METAL-AIR FLOW BATTERY STACK

MEMBRANE-ELECTRODE ASSEMBLY AND FUEL CELL COMPRISING SAME

ELECTROCHEMICAL CATALYST INCLUDING NANO-SILICATE COMPOSITE, MANUFACTURING METHOD THEREFOR, AND ELECTRODE COMPOSITION AND ELECTRODE INCLUDING SAME

FUEL ELECTRODE OF SOLID OXIDE CELL FOR CARBON DIOXIDE CONVERSION USING Pt, Pd, AND/OR Ni CATALYST AND MANUFACTURING METHOD FOR THE SAME

RAPID MANUFACTURING OF ULTRA-THIN SOLID OXIDE CELLS FOR FUEL CELLS AND ELECTROLYZERS

CARBON NITRIDE COATED NITROGEN DOPED PtNi OXYGEN REDUCTION REACTION CATALYST FOR PROTON EXCHANGE MEMBRANE FUEL CELLS

FUEL ELECTRODE FOR HYDROGEN FUEL CELL USING Pt AND/OR Pd CATALYST AND METHOD FOR MANUFACTURING SAME

LSM-MCO COMPOSITE POWDERS FOR SOLID OXIDE ELECTROCHEMICAL CELL AND INTERCONNECT COATINGS AND METHODS OF FORMING SAME

Coating Structure for Plates, Coating Method for Plates, and Bipolar Plate

ADHESIVE COMPOSITION FOR FUEL CELL SEALING MEMBERS, MEMBER FOR FUEL CELLS, AND METHOD FOR PRODUCING MEMBER FOR FUEL CELLS

ION FILTER, FUEL CELL SYSTEM COMPRISING THE SAME AND FUEL CELL VEHICLE COMPRISING THE SAME

MEMBRANE-ELECTRODE ASSEMBLY HAVING A MOISTURE DISCHARGE STRUCTURE AND MANUFACTURING METHOD THEREOF

STATIONARY FUEL CELL SYSTEM

DIAGNOSTIC METHOD FOR DIAGNOSING A STATE OF AN ELECTROCHEMICAL CELL OF AN ELECTROCHEMICAL ENERGY CONVERTER

INPUT ASSEMBLY FOR A POWER TRANSFER UNIT

METHOD AND AN APPARATUS, A CONTROLLER, A SYSTEM, AND A PROGRAM PRODUCT FOR LIMITING CURRENT

MICROBIAL FUEL CELL MULTIPLEXER APPARATUS, SYSTEM AND METHOD

INTEGRATED FUEL REFORMING REACTOR AND FUEL CELL ELECTRICITY GENERATION DEVICE AND METHOD

FUEL CELL PLATE

FLOW BATTERY FLOW FIELD WITH MULTIPLE SERPENTINE CHANNELS

SOLID OXIDE STACK WITH OPEN AIR EXHAUST

FLOW BATTERY

BATTERY MATERIAL MANUFACTURING APPARATUS, BATTERY MATERIAL MANUFACTURING SYSTEM, AND BATTERY MATERIAL MANUFACTURING METHOD

Apparatus, System and Method for Continuous Battery Stacking with Singulation Drum

MANUFACTURING SYSTEM

POWER STORAGE DEVICE AND METHOD OF MANUFACTURING POWER STORAGE DEVICE

SYSTEMS AND METHODS FOR PERFORATED JELLYROLL BATTERY

MANUFACTURING SYSTEMS AND METHODS FOR OPTIMIZED CURING OF STRUCTURAL ADHESIVE MATERIALS OF BATTERY MODULES

METHOD FOR MANUFACTURING AT LEAST ONE BATTERY HOUSING PART, BATTERY HOUSING PART, AND DEVICE FOR MANUFACTURING A BATTERY HOUSING PART

ORGANIC-INORGANIC COMPOSITE MEMBRANE FOR SECONDARY BATTERY, METHOD FOR MANUFACTURING THE SAME, AND LITHIUM SECONDARY BATTERY INCLUDING THE SAME

Lithium Secondary Battery

ELECTROLYTE COMPOSITION FOR LITHIUM SECONDARY BATTERY AND LITHIUM SECONDARY BATTERY COMPRISING SAME

LITHIUM SECONDARY BATTERY

SOLID-STATE BATTERY WITH ENHANCED SOLID ELECTROLYTE

NEW Li-CONDUCTOR PROTOTYPES IN THE Li-Mg-Na-C1 CHEMICAL SPACE FOR SOLID-STATE BATTERIES

HALIDE SOLID ELECTROLYTE, METHOD FOR PRODUCING SAME, AND SECONDARY BATTERY COMPRISING SAME

ORGANIC SOLID ELECTROLYTE AND ALL-SOLID-STATE SODIUM-ION BATTERY

SULFIDE SOLID ELECTROLYTE PRODUCTION METHOD

SINGLE-ION CONDUCTING GEL POLYMER ELECTROLYTE AND METHOD FOR MANUFACTURING THE SAME

POLYMER ELECTROLYTE

SECONDARY BATTERY AND ELECTRIC APPARATUS CONTAINING SAME

SILICON-BASED ENERGY STORAGE DEVICES WITH ELECTROLYTE CONTAINING CROWN ETHER BASED COMPOUNDS

Sulfonamide-Based Electrolyte Additives For Electrochemical Batteries

LITHIUM-ION BATTERY AND ELECTRIC APPARATUS INCLUDING SAME

LITHIUM SECONDARY BATTERY AND ELECTRIC DEVICE

SECONDARY BATTERY AND METHOD OF MANUFACTURING SAME

ELECTRODE MEMBER

METHOD AND APPARATUS FOR COMPRESSING STACKED CELLS

BATTERY

AQUEOUS BATTERY

CORE PACK ASSEMBLY, BATTERY, BATTERY PACK, AND VEHICLE

LITHIUM METAL BATTERY ARCHITECTURE

ELECTROLYTE COMPOSITION FOR LITHIUM SECONDARY BATTERY AND LITHIUM SECONDARY BATTERY COMPRISING SAME

Monomer for Electrolyte, Electrolyte for Secondary Battery Including the Same, Method of Preparing the Same and Lithium Secondary Battery Including the Same

INSULATING COMPOSITION FOR RECHARGEABLE LITHIUM BATTERY, ELECTRODE AND RECHARGEABLE LITHIUM BATTERY MANUFACTURED USING SAME

LITHIUM-ION SECONDARY BATTERY, POSITIVE ELECTRODE STRUCTURE THEREOF, AND CHARGING AND DISCHARGING METHOD THEREFOR

ELECTRODE ASSEMBLY AND SECONDARY BATTERY

BATTERY MANAGEMENT APPARATUS AND METHOD

PARALLEL CONNECTION BATTERY PACK ASSEMBLY EMPLOYING STRUCTURE FOR PREVENTING DAMAGE CAUSED BY INRUSH CURRENT TO BATTERY PACK

ALL-SOLID-STATE BATTERY SYSTEM

ON-BOARD ELECTRICAL SYSTEM FOR A MOTOR VEHICLE AND MOTOR VEHICLE

SMART BATTERY DEVICE AND ITS RECYCLING METHOD AND SYSTEM

CELL ASSEMBLY AND SAFETY SYSTEM

METHOD FOR ACTIVATING LITHIUM SECONDARY BATTERY

CHARGING METHOD AND CHARGING DEVICE FOR BATTERY

FLEXIBLE WIRING COMPONENT AND CONDUCTIVE MODULE

BATTERY AND ELECTRIC APPARATUS

POWER SUPPLY DEVICE RECYCLING METHOD

RECYCLING AND REGENERATION OF LITHIUM-ION BATTERY CATHODES

BATTERY PACK

BATTERY SYSTEM AND COOLING METHOD OF BATTERY PACK

ELECTRIFIED VEHICLE

TRACTION BATTERY PACK IMMERSION THERMAL MANAGEMENT SYSTEM WITH LIQUID COOLANT CHANNELS ESTABLISHED BY BATTERY CELLS

BATTERY MODULE AND BATTERY SYSTEM INCLUDING THE SAME

HEATING ELEMENT AND SOLID STATE BATTERY COMPRISING THE SAME, AND METHODS OF MAKING AND OPERATING THEREOF

COOLING PLATE ARRANGEMENT, BATTERY SYSTEM, ELECTRIC VEHICLE AND METHOD FOR ASSEMBLING

BATTERY PACK

DEVICE FOR SPACING BATTERY CELLS OF A VEHICLE BATTERY PACK

BATTERY ASSEMBLY

PORTABLE ENERGY SYSTEM

Heat Exchanger with Regulation of the Current of the Heat Transfer Medium

IMMERSION COOLING MODULE

PHOTONIC ENHANCED BATTERY

THERMAL INSULATION PLATE FOR THERMALLY PROTECTING A PRISMATIC BATTERY CELL

BATTERY MODULE

BATTERY DEVICE

ENERGY STORAGE SYSTEM INCLUDING NON-STRUCTURAL END PLATES

CHARGING SYSTEM FOR METAL-AIR FLOW BATTERY AND METAL-AIR FLOW BATTERY

INTEGRATED METAL HYDROGEN-OXYGEN FUEL CELL SYSTEM BASED ON ALUMINUM-LITHIUM ALLOY

METAL-AIR SECONDARY BATTERY

BATTERY CELL, BATTERY, AND ELECTRIC APPARATUS

LOWER PLASTIC MEMBER, END-COVER ASSEMBLY, ENERGY STORAGE APPARATUS, AND ENERGY STORAGE SYSTEM

END-COVER ASSEMBLY, ENERGY STORAGE APPARATUS, AND ELECTRICITY-CONSUMPTION DEVICE

SEALING PLATE FOR FLAT BATTERIES, AND FLAT BATTERY

LOWER PLASTIC MEMBER, END-COVER ASSEMBLY, ENERGY STORAGE APPARATUS, AND ELECTRICITY-CONSUMPTION DEVICE

ALKALINE DRY BATTERY

SECONDARY BATTERY AND BATTERY PACK INCLUDING THE SECONDARY BATTERY

BATTERY CELL

END COVER ASSEMBLY, ENERGY-STORAGE APPARATUS, AND ELECTRICITY-CONSUMPTION DEVICE

BATTERY ASSEMBLY

ECO-FRIENDLY POWER SOURCE SUCH AS BATTERY MODULE FOR A TRANSPORTATION VEHICLE

BATTERY MODULE

BATTERY SYSTEM WITH INLAY ELEMENT PROVIDING MULTIPLE-SEALING

EDGE GUARDS FOR SOLID STATE BATTERIES

SYSTEMS, APPARATUS, AND METHODS FOR UTILIZING SOLAR ENERGY AND OTHER TYPES OF RENEWABLE ENERGY

HOUSING ASSEMBLY, MOVABLE ENERGY STORAGE APPARATUS, AND ENERGY STORAGE SYSTEM

BEAM STRUCTURE OF BATTERY, BATTERY AND ELECTRIC DEVICE

METHOD FOR MANUFACTURING BATTERY CELL, BATTERY CELL, BATTERY, AND ELECTRIC APPARATUS

PRODUCTION LINE FOR MANUFACTURING BATTERY HOUSING PARTS AND METHOD FOR MANUFACTURING BATTERY HOUSING PARTS

BATTERY SYSTEM WITH NUT PROVIDING DUAL-SEALING

MODULAR BATTERY SYSTEMS AND BATTERY MODULES THEREOF

DEBONDABLE ADHESIVE ASSEMBLY FOR BATTERY PACK

Battery Pack and Vehicle Including the Same

POWER SOURCE APPARATUS AND METHOD OF MANUFACTURE THEREOF

BATTERY MODULE AND BATTERY PACK COMPRISING THE SAME

BATTERY APPARATUS AND ELECTRIC DEVICE

Spring contacts in a sub-housing for a rechargeable battery

POWER SYSTEMS COMPRISING BATTERY ARRAYS

RECHARGEABLE BATTERY MODULE

SECONDARY BATTERY

ENERGY STORAGE UNIT WITH ACTIVE VENTILATION SYSTEM AND ASSOCIATED METHOD

BATTERY CELL, BATTERY, AND ELECTRICAL DEVICE

END COVER ASSEMBLY, ENERGY STORAGE APPARATUS, AND ELECTRICITY-CONSUMPTION DEVICE

ELECTRICITY STORAGE APPARATUS

Battery Pack and Device Including the Same

BATTERY AND ELECTRIC APPARATUS

BATTERY PACK AND VEHICLE INCLUDING THE SAME

BATTERY UNIT WITH A PLURALITY OF BATTERY CELLS AND A DEVICE FOR PROTECTION AGAINST THERMAL PROPAGATION

SECONDARY BATTERY MODULE WITH VENT POTTING PLATE AND METHOD OF MANUFACTURING SAME

Battery Case For Secondary Battery And Method For Manufacturing Gas Discharge Part

BATTERY, BATTERY PREPARATION METHOD, AND ELECTRIC DEVICE

SEPARATOR FOR RECHARGEABLE BATTERY AND RECHARGEABLE BATTERY INCLUDING THE SAME

SEPARATOR FOR RECHARGEABLE BATTERY AND RECHARGEABLE BATTERY INCLUDING THE SAME

SEPARATOR FOR RECHARGEABLE LITHIUM BATTERY AND RECHARGEABLE LITHIUM BATTERY INCLUDING THE SAME

COMPOSITE SEPARATOR, AND PREPARATION METHOD THEREFOR AND USE THEREOF

SEPARATOR FOR RECHARGEABLE BATTERY AND RECHARGEABLE BATTERY INCLUDING THE SAME

POUCH-TYPE RECHARGEABLE LITHIUM BATTERY

SEPARATOR FOR RECHARGEABLE BATTERY AND RECHARGEABLE BATTERY INCLUDING THE SAME

SEPARATOR, METHOD FOR PREPARING THE SAME AND SECONDARY BATTERY AND ELECTRICAL DEVICE RELATED THERETO

SEPARATOR FOR RECHARGEABLE BATTERY AND RECHARGEABLE BATTERY INCLUDING THE SAME

SEPARATOR FOR RECHARGEABLE BATTERY AND RECHARGEABLE BATTERY INCLUDING THE SAME

Electrode and Battery

SEPARATOR FOR RECHARGEABLE BATTERY AND RECHARGEABLE BATTERY INCLUDING THE SAME

LITHIUM SECONDARY BATTERY INCLUDING Si-BASED ANODE ACTIVE MATERIAL

BUSBAR AND RECHARGABLE BATTERY MODULE INCLUDING THE SAME

ENERGY-STORAGE MODULE AND ELECTRICITY-CONSUMPTION DEVICE

ASSEMBLY SET FOR ASSEMBLING A CARRIER FRAMEWORK FOR A STACK OF BATTERY CELL BLOCKS

BUSBAR MODULE CASE AND BUSBAR MODULE

POWER STORAGE DEVICE

BATTERY CELL

BATTERY CELL, BATTERY, AND ELECTRIC APPARATUS

BATTERY PACK

SECONDARY BATTERY AND METHOD OF MANUFACTURING THE SECONDARY BATTERY

ELECTRODE AND SECONDARY BATTERY INCLUDING SAME AND METHOD OF MANUFACTURING ELECTRODE

BATTERY CELL, BATTERY, ELECTRICAL APPARATUS, AND ENERGY STORAGE CABINET

Current Collector and Battery Cell Including the Same, Battery Pack, and Vehicle

POWER STORAGE DEVICE

SECONDARY BATTERY AND METHOD OF MANUFACTURING SECONDARY BATTERY

CONDUCTIVE STRUCTURE, COVER PLATE ASSEMBLY, AND BATTERY CELL

SECONDARY BATTERY HAVING BENT STRIP TERMINAL AND METHOD AND APPARATUS FOR MANUFACTURING THE SAME

BATTERY CELL, BATTERY, AND ELECTRICAL APPARATUS

SENSING ASSEMBLY WITH CONTROL MODULES FOR A BATTERY PACK INTERCONNECT ASSEMBLY FOR A BATTERY PACK

PROTECTION CIRCUIT MODULE AND BATTERY PACK

BATTERY CELL AND PREPARATION METHOD THEREOF, BATTERY, AND POWER CONSUMING APPARATUS

METHOD AND LINE FOR FILLING CONTAINERS OF ELECTROCHEMICAL CELLS AND BATTERY PRODUCTION METHOD

Cylindrical Battery Cell Cleaning Carrier, Cylindrical Battery Cell Produced Using the Same, and Battery Pack and Vehicle Including Cylindrical Battery Cell

PHASE SHIFTING APPARATUS AND ANTENNA

Reconfigurable filtering device and system for acquiring radiofrequency signals incorporating such a filtering device

ELECTRONIC DEVICE

ANTENNA STRUCTURE AND ELECTRONIC DEVICE COMPRISING SAME

ANTENNA STRUCTURE AND ELECTRONIC DEVICE INCLUDING THE SAME

ANTENNA STRUCTURE ON PACKAGE

ELECTRONIC DEVICE COMPRISING ANTENNA

Integrated Antenna In An Aerial Vehicle

RADOME WALL FOR COMMUNICATION APPLICATIONS

ELECTRONIC DEVICE

ELECTRONIC DEVICE

ANTENNA, ANTENNA FEEDER SYSTEM, AND BASE STATION

SWITCHABLE ANTENNA SYSTEM FOR TWO-PIECE DEVICE

TUNING CIRCUIT ARCHITECTURE TO INCREASE METASURFACE ANTENNA PERFORMANCE

ELECTRONIC DEVICE

WIDE BEAM ULTRA-WIDEBAND ANTENNA

DEVICE INCLUDING A FLEXIBLE ANTENNA

MICROELECTRONIC DEVICES DESIGNED WITH MOLD PATTERNING TO CREATE PACKAGE-LEVEL COMPONENTS FOR HIGH FREQUENCY COMMUNICATION SYSTEMS

COMPACT RADIATION PATTERN DECOUPLING DESIGN OF TWO-DIMENSIONAL MIMO MICROSTRIP ANTENNAS

ULTRA-WIDEBAND DUAL POLARIZED ANTENNA

RADIATOR MODULE AND ANTENNA DEVICE FOR PERFORMING BROADSIDE RADIATION AND END-FIRE RADIATION

LIQUID CRYSTAL COMPOSITION FOR RADIO WAVE CONTROL ELEMENT, AND RADIO WAVE CONTROL ELEMENT

HIGH-FREQUENCY DIFFUSION SHEET

ANTENNA MODULE

Antenna Array on Curved and Flat Substrates

UNIVERSAL CONNECTOR

CRIMP TERMINAL AND CRIMP CONNECTOR

AXIAL INSULATION DISPLACEMENT CONTACT AND CONNECTION ASSEMBLY

HIGH VOLTAGE CONNECTOR FOR AN ALUMINUM CABLE WITH A COPPER TERMINAL

A SUPERCONDUCTOR CONNECTOR ASSEMBLY AND METHODS OF ASSEMBLY AND DISASSEMBLY

SHIELD TERMINAL

BUSBAR CLIP ASSEMBLY, CONNECTOR ASSEMBLY, AND BUSBAR CLIP

LEAD WIRE ATTACHMENT COMPONENT FOR ELASTIC SENSORS

POWER CABLE ASSEMBLY

LEVER-TYPE CONNECTOR

ELECTRICAL CONNECTOR AND ELECTRICAL CONNECTOR ASSEMBLY

HIGH-SPEED, EASY-MAINTENANCE CONNECTOR AND INTERCONNECTION SYSTEM THEREOF

RUGGED, HIGH VOLTAGE, LOW CURRENT CONNECTOR

ELECTRICAL CONNECTOR, CIRCUIT BOARD ASSEMBLY, AND ELECTRONIC DEVICE

ELECTRICAL CONTACT MATERIAL

CONNECTOR ASSEMBLY

CONNECTOR

CABLE HARNESS

CONNECTOR

CONNECTOR ASSEMBLY

CONNECTOR

MEMORY WITH TELESCOPIC DATA CONNECTOR

SHELL AND CONNECTOR

ELECTRICAL CONNECTOR ASSEMBLY AND SYSTEM

Assembled Type Waterproof Power Plug Component

BREAKAWAY COUPLING

CONNECTOR ASSEMBLY MACHINE FOR ELECTRICAL CONNECTOR INCLUDING GROMMETS

Electrical Contact Element and Electrical Connector

LEVER-TYPE CONNECTOR

CONNECTOR STRUCTURE

LIQUID PUMP UNIT WITH LATCH MECHANISM

Connector

CONNECTOR

ELECTRICAL CONNECTOR AND CONNECTOR ASSEMBLY WITH CABLE EXTENDING OPPOSITE TO MATING DIRECTION

ELECTRICAL CONNECTOR WITH SLIDER TO PROTECT TERMINALS

CONNECTOR

CONNECTOR

CONNECTOR ASSEMBLY WITH IMPROVED TONGUE PLATE FOR PROTECTING CONDUCTIVE TERMINALS

ELECTRICAL CONNECTOR WITH IMPROVED SHIELDING EFFECT

ELECTRICAL CONNECTOR WITH IMPROVED SHIELDING EFFECT

ELECTRICAL SHIELDING CONFIGURATION FOR HIGH-SPEED ELECTRICAL CONNECTOR

ELECTRICAL SHIELDING CONFIGURATION FOR HIGH-SPEED ELECTRICAL CONNECTOR

Controllable Electrical Outlet with a Controlled Wired Output

SUPPORT LIGHTING FOR ELECTRICAL POWER SYSTEMS

TERMINAL

CONNECTOR

VARIABLE LENGTH BUSBAR MODULE FOR ELECTRIC VEHICLE

Snap-In Bridge Connector

FLUID COUPLING FOR AN ELECTRIC CURRENT

LASER APPARATUS

LASER APPARATUS AND METHOD OF MANUFACTURING ELECTRONIC DEVICE

LIGHT AMPLIFICATION DEVICE, LIGHT TRANSMISSION SYSTEM, AND LIGHT AMPLIFICATION METHOD