POLYURETHANE ADHESIVE

Electrically Debondable UV Activated Adhesives

HEAT RADIATION COMPOSITE FILM

BONDED STRUCTURE

DYNAMICALLY CROSSLINKED TOUGH ADHESIVE WITH RECYCLABILITY

STRUCTURAL ADHESIVES

PROCESSABLE POLYIMIDE-PHTHALONITRILE APPLICATION FORMS AND METHODS THEREOF

ELECTRICALLY CONDUCTIVE ACRYLIC PRESSURE SENSITIVE ADHESIVE TAPES COMPRISING MOISTURE BARRIER LAYER

Thermal Runaway Fumes Management

PRIMER COMPOSITION FOR ADHESIVE BONDING AND METHOD OF USING THE SAME

BIO-BASED POLYMERS FROM RAW LIGNOCELLULOSIC BIOMASS

Bonding Method And Hot-Melt Adhesive Film For Induction Heating

ADHESIVE FILM, METAL TERMINAL USING SAME, AND SECONDARY BATTERY

COMPOUND, BONDING AGENT, BONDED BODY, PRINTED CIRCUIT BOARD, AND METHOD FOR MANUFACTURING BONDED BODY

SOLID ELECTROLYTE MEMBRANE COMPRISING ADHESIVE LAYER AND RECHARGEABLE BATTERY INCLUDING THE SAME

MODIFIED WAX THAT CAN IMPROVE THE ADHESION BETWEEN POLYPROPYLENE AND A METAL SUBSTRATE

ADHESIVE LAMINATE AND ELECTRONIC DEVICE HOUSING

REINFORCED RELEASABLE ADHESIVE

PLASMA MODIFICATION OF ADHESIVE AND SUBSTRATE SURFACES FOR USE IN ADHESIVE JOINT APPLICATIONS

ELASTIC (METH)ACRYLATE COMPOSITION WITH IMPROVED ADHESION ON OILY SUBSTRATES

Two-Component Polyurethane Adhesive Composition for Film Lamination in Hot Filling Application

DUAL CURE ADHESIVE COMPOSITION

RESIN COMPOSITION, POLYIMIDE PREPARATION METHOD AND RELATED PRODUCTS

BONDING SYSTEM

PRESSURE-SENSITIVE ADHESIVE, PRESSURE-SENSITIVE ADHESIVE FILM AND PRESSURE-SENSITIVE TAPE

LIGHTWEIGHT RF SHIELDING CONDUCTIVE ELASTOMERIC TAPE

RESIN COMPOSITION, CURED PRODUCT, SHEET-LIKE LAMINATE MATERIAL, RESIN SHEET, PRINTED WIRING BOARD, AND SEMICONDUCTOR DEVICE

ELECTRICALLY DEBONDABLE UV ACTIVATED ADHESIVES

LAMINATED PACKAGING MATERIAL, OUTER-LAYER ADHESIVE, AND METHOD FOR MANUFACTURING THE SAME

SEAM TAPE, COMPONENT MATERIAL, AND ACCESSORY MATERIAL WITH EPOXY ADHESIVE FOR INFLATABLE SAFETY PRODUCTS

Low emissivity seam tape for inflatable safety products

Fabric or flexible material with hot melt adhesive for inflatable safety products

DRY ADHESIVE ARTICLE INCLUDING A LAYER OF POLYACRYLATE BLOCK COPOLYMER NANOFIBERS, A METHOD OF FORMING THE LAYER OF NANOFIBERS, AND A LIQUID COMPOSITION FOR USE IN FORMING THE LAYER OF NANOFIBERS

TWO COMPONENT (2K) CURABLE ADHESIVE COMPOSITION

TWO-COMPONENT CURABLE RESIN COMPOSITION AND CURED PRODUCT THEREOF

TAPE FOR MITIGATING PASSIVE INTERMODULATION

BENZOXAZINE RESIN AND PREPARATION METHOD THEREOF, AND ADHESIVE

ELEVATOR LOAD BEARING MEMBER WITH CONDUCTIVE ADHESIVE

COMPOSITION

DEBONDABLE STRUCTURE BASED ON A SOLVENT-BORNE PRESSURE SENSITIVE ADHESIVE (PSA)

MOUNT TAPE HAVING AN INNER SUPPORT LAYER BETWEEN ADHESIVE LAYERS FOR SEMICONDUCTOR DEVICE ASSEMBLY

EPOXY RESIN COMPOSITION, CURED PRODUCT THEREOF, AND LAMINATE

METHODS OF BONDING COPPER AND ARTICLES FORMED THEREBY

COMPOSITE MATERIALS AND METHODS FOR INHIBITING RODENT INGRESS

ONE-COMPONENT THERMOSETTING EPOXY ADHESIVE WITH IMPROVED ADHESION AT HIGH TEMPERATURES

BINDING PIECE FOR ELECTROCHEMICAL APPARATUS, ELECTROCHEMICAL APPARATUS, AND ELECTRONIC APPARATUS

A CAMOUFLAGE TAPE, AND CAMOUFLAGE TAPE SYSTEM FOR TEMPORARY MULTISPECTRAL CAMOUFLAGE OF OBJECTS

EPOXY RESIN ADHESIVE FOR MEDICAL DEVICE AND CURED PRODUCT OF THE SAME, AND MEDICAL DEVICE MEMBER AND MEDICAL DEVICE

Antimicrobial metallized thin films for refurbishing communal contact surfaces

Biaxially oriented polyester film and laminated body

BIAXIALLY ORIENTED POLYESTER FILM AND LAMINATED BODY

Metal surface treatment

Method for creating an adhesive bond using an elastomeric material

PRIMER COMPOSITION FOR ADHESIVE BONDING AND METHOD OF USING THE SAME

Method for the adhesive bonding of electrical sheets and electrical sheet packs produced according to a corresponding method

BONDING DISSIMILAR MATERIALS USING RADIO FREQUENCY WAVE CURING

STRUCTURAL ADHESIVES

ADHESIVELY-LAMINATED CORE MANUFACTURING METHOD AND ADHESIVELY-LAMINATED CORE MANUFACTURING DEVICE

LAMINATE

Multilayer tape

SELF-ADHESIVE MILLABLE SILICONE RUBBER COMPOSITION

Thermally Conductive Composite and Method of Making the Same

CURABLE SILICONE PRESSURE SENSITIVE ADHESIVE EMULSION AND METHOD FOR ITS PREPARATION

CYANOACRYLATE COMPOSITIONS

Composition comprising maleimide pre-polymerized resin

FILM AND LAMINATE

ALUMINUM ALLOY ARTICLES EXHIBITING IMPROVED BOND DURABILITY AND METHODS OF MAKING THE SAME

Ion-conducting bio-based polymers from raw lignocellulosic biomass

Self-Disinfecting Multi-Band Photocatalyst Sheet

Resin composition and article made therefrom

Method of applying an adhesive film to a component and tool suitable therefor

LIGHT AND MOISTURE CURABLE COMPOSITIONS

Resin composition and article made therefrom

STAMPING FOIL USABLE IN ECO-FRIENDLY PAPER PACKING MATERIAL RECYCLABLE THROUGH SEPARATION OF TRANSFER FILM AND PAPER

DYNAMICALLY CROSSLINKED TOUGH ADHESIVE WITH RECYCLABILITY

Nonaqueous sol-gel for adhesion enhancement of water-sensitive materials

Composite Cooling Film Comprising an Organic Polymeric Layer, a UV-Absorbing Layer, and a Reflective Metal Layer

Bonding sheet and bonded structure

ELECTRICALLY CONDUCTIVE MASKING TAPE

Adhesive devices and uses thereof

Polyolefin-based adhesive composition

Expandable structural adhesive film for dissimilar metal bonding

ELECTRICAL STEEL STRIP OR SHEET, METHOD FOR PRODUCING SUCH AN ELECTRICAL STEEL STRIP OR SHEET, AND LAMINATED CORE MADE THEREFROM

ADHESIVE FILM

OPTICAL ADHESIVE TAPE AND DISPLAY PANEL

LATENT EPOXY-AMINE COMPOSITION FOR CIPP APPLICATION

ADHESIVE FILM FOR METAL TERMINAL, METAL TERMINAL WITH ADHESIVE FILM FOR METAL TERMINAL, POWER STORAGE DEVICE USING SAID ADHESIVE FILM FOR METAL TERMINAL, AND METHOD FOR PRODUCING POWER STORAGE DEVICE

ADHESIVE FILM, COMPOSITE FILM, ALL-SOLID-STATE BATTERY AND METHOD FOR PRODUCING COMPOSITE FILM

SEPARATOR FOR NON-AQUEOUS SECONDARY BATTERY AND NON-AQUEOUS SECONDARY BATTERY

Permanent, self-adhering, self-lubricating, anti-wear composite system

CURABLE COATING COMPOSITIONS

Polymers For Bonding Coral

Siloxane tackifying resin layers as adhesion promotion agents

Composition for adhesives, outer package material for electricity storage devices, and method for producing same

Addition curable silicone adhesive compositions

Structural adhesives

RESIN COMPOSITION, CURED PRODUCT, SHEET-LIKE LAMINATE MATERIAL, RESIN SHEET, PRINTED WIRING BOARD, AND SEMICONDUCTOR DEVICE

PRESSURE-SENSITIVE ADHESIVE SHEET

Anaerobically Curable Compositions

Re-workable adhesives for electronic devices

Two-Component Solvent-Based Adhesive Composition

Adhesive composition, method for producing surface-treated metal member, and method for producing metal-resin composite body

Method for preparing pressure-sensitive adhesive composition, method for producing protective sheet and method for producing glass unit

Adhesive sheet and method for applying adhesive sheet to rough surface

Two-component solvent-less adhesive composition

Retrofit sanitary handle

MULTILAYER ADHESIVE TAPE

Adhesive compositions with polyesters comprising 2,2,4,4-tetraalkyl-1,3-cyclobutanediol and methods of making the same

Adhesive compositions with polyesters comprising 2,2,4,4-tetraalkyl-1,3-cyclobutanediol

Adhesive with high filler content

Diecut especially for permanently closing holes

ANTIMICROBIAL METALLIZED THIN FILMS FOR REFURBISHING COMMUNAL CONTACT SURFACES

Resin composition, metal laminate and printed circuit board using same, and method for manufacturing metal laminate

Adhesive composition

Transfer foil for touch sensor and method for manufacturing conductive film for touch sensor

Method for mitigating passive intermodulation

Two-part adhesive composition that undergoes a visual change when cured

Polyurethane dispersions and their use to produce coatings and adhesives

ADHESIVE COMPOSITIONS INCLUDING 1,4-CYCLOHEXANEDIMETHANOL AND METHODS OF MAKING THE SAME

Bonded structure and method for producing same

Method for producing optical silicone assembly, and optical silicone assembly produced thereby

Surface Concealment System

Structural polyurethane adhesive having good adhesion after short-duration heating

ELECTRICALLY CONDUCTIVE ACRYLIC PRESSURE SENSITIVE ADHESIVE TAPES COMPRISING MOISTURE BARRIER LAYER

Reversible networks in polymeric materials

Multilayer tape

Malonates and derivatives for in-situ films

Electronic device including display

Method for joining two workpieces

Method and articles of manufacture for masking irregular or curved boundaries

Hot-melt pressure sensitive adhesive composition and uses thereof

ADHESIVE TAPE

Method of preparing laminated article

Permanent, self-adhering, self-lubricating, anti-wear composite system

Multi-layered anisotropic conductive adhesive having conductive fabric and preparation thereof

Adhesive tape for applying to a component of a motor vehicle, use of an adhesive tape, assembly of two components, and method for sticking together two components of a motor vehicle

Adhesive sheet and method of applying adhesive sheet to rough surface

Waterbased one coat adhesive composition

DOUBLE-SIDED ADHESIVE TAPE

HANDLE COVERS AND HANDLES WITH BIOACTIVE SURFACE COATINGS

Method for mitigating passive intermodulation using roofing material with polymeric and metal layers

Thin electromagnetic shielding sheet and electronic device provided with same

Thermally activatable, fast curing adhesive coating

Light retroreflective graphic textile

PRESSURE-SENSITIVE ADHESIVE FILM

Heat-resistant weld backing tape for high energy applications

Self-adhesive membrane for mitigating passive intermodulation

Single-sided pressure-sensitive adhesive tape

Adhesion-regulating agents and methods for tuning adhesion strength of acrylic adhesives by substrate modification

Poly(aryl ether ketone) (PAEK) compositions including a low molecular weight aromatic compound

Preparation method for composite material

Adhesive composition and heat-fusible member using same

Multi-material assembly and methods of making there of

BONDING AGENT COMPOSITION

POLYMER COMPOSITION FOR ADHESIVE APPLICATION

Sulfonated block copolymer laminates with polar or active metal substrates

VAPOUR BARRIER, WHICH IS SELF-ADHESIVE ON ONE SIDE, FOR SEALING OFF FLOORS HAVING RESIDUAL MOISTURE

VARIABLE RATIO ADHESIVE APPLICATION

Lightweight RF shielding conductive elastomeric tape

Laminate for battery

Heat-applied gap finishing tape

ELECTRICALLY CONDUCTIVE ADHESIVE LAYER

Method of making a sheath for an elongated object

Adhesive film for semiconductor, and semiconductor device

Methods of adhering in an aqueous environment

LIQUID CRYSTAL PANEL AND IMAGE DISPLAY DEVICE

Double-sided self-adhesive vapor barrier

Method for producing a sealed folded joint

Article with self-bonding fully cured elastomer

Method for producing plate packs

Method for reversible bonding

Method for the non-releasable connection of components or component regions and non-releasable connection

Malonates and derivatives for in-situ films

Adhesive tape for encapsulating electronic constructions

Thermoset adhesive, automotive component using thermoset adhesive, and method of manufacturing same

Bio-based polymers from raw lignocellulosic biomass

Flexible electromagnetic shielding sheet and electronic device provided with same

Conductive adhesive tape using compressible conductive powder and manufacturing method thereof

Battery packaging material, battery, and method for producing battery packaging material

Anaerobically curable (meth)acrylate compositions

Method for joining two fibre-reinforced plastic components

Slide bearing comprising a primer system as adhesion promoter

Heating tape and system

Nonaqueous sol-gel for adhesion enhancement of water-sensitive materials

Method for integrally bonding a cast aluminum part to a joining partner, and part

Packaging material for power storage devices, and method of producing packaging material for power storage devices

Reactive two-component adhesive system in the form of a film and bonding method

Thermosetting adhesive sheet, reinforcement-part-equipped flexible printed circuit, method for manufacturing reinforcement-part-equipped flexible printed circuit, and electronic device

TUNABLE ADHESIVE COMPOSITIONS AND METHODS

ADHESIVE AND ADHESIVE TAPE

Method for connecting two objects using a polymer composition and a system, for use in a cosmetic procedure

Conductive sheet

Tangential joining method

Double-sided adhesive tape, electronic instrument provided with double-sided adhesive tape, disassembly structure provided with double-sided adhesive tape, and adhered structure

Thermal bonding sheet and thermal bonding sheet with dicing tape

Multi-layered anisotropic conductive adhesive having conductive fabric and preparation thereof

Thermally activatable, fast curing adhesive coating

Thermosetting adhesive composition, thermosetting adhesive film, and composite film

Joining structure and joining method for vehicle

Fluorinated vinyl polymer resin composition, prepreg and laminate materials containing the same

ADHESIVE LAMINATE AND METHOD FOR MAKING RETROREFLECTIVE TAPE WITH THE ADHESIVE LAMINATE

Adhesive sheet

High Pressure Connection Systems and Methods for their Manufacture

Method for mitigating passive intermodulation

Self-adhesive membrane for mitigating passive intermodulation

Method of manufacturing encapsulation film and organic light emitting display device using photo- or thermal-curable adhesive

Method of bonding substrates, microchip and method of manufacturing the same

HIGH TEMPERATURE RESISTANT PRESSURE SENSITIVE ADHESIVE WITH LOW THERMAL IMPEDANCE

Shielding film and shielded printed wiring board

Method of increasing surface adhesion of an architectural metal finish

Conductive pressure-sensitive adhesive tape

MAGNETIC DISC DRIVE, HELIUM GAS FILLED CONTAINER, AND APPARATUS

Material for printed circuit board, metal laminate, methods for producing them, and method for producing printed circuit board

Decorative grill decal and method of use

DOUBLE-SIDED PRESSURE-SENSITIVE ADHESIVE TAPE

Linear for protection of adhesives

Adhesive composition for touch panels, adhesive film, and touch panel

MASKING SHEET FOR ANODIZING

Adhesive composition and laminate with adhesive layer using same

Method for producing a cladding for elongated material

ELECTRICALLY CONDUCTIVE ADHESIVE TAPES

Adhesive composition for touch screen panel, optical adhesive film and touch screen panel

Adhesive layer-equipped laminate, and flexible copper-clad laminate sheet and flexible flat cable using same

METHOD FOR THE PRODUCTION OF A TUBULAR MEMBER, AND TUBULAR MEMBER

Pressure-sensitive adhesive sheet

WET AND DRY SURFACE ADHESIVES

Activatable adhesive, labels, and related methods

Relating to structural adhesives

ADHESIVE TAPES AND HEAT SPREADER ASSEMBLIES

Adhesive tape and solar assembly and article made thereof

Adhesive sheet and method for producing same

Adhesive sheet and adhesive sheet production method

Carbon flocked tape

Foil image formation method

METHOD FOR MANUFACTURING A PROCESS APPARATUS AND A PROCESS APPARATUS

ANTIVIRAL, ANTI MICROBIAL PROTECTION FOR TOUCH SURFACES

Adhesive sheet

Adhesive sheet and method for producing adhesive sheet

Polyphenylene ether oligomer and high-frequency copper clad laminate

Adhesive sheet

Adhesive sheet

Polyolefin-based compositions having polyisobutylenes, adhesives, and related multi-layered structures thereof

Conductive adhesive composition

Foam composite sheet

Cargo transportation container and method of assembling the same

SYSTEMS AND METHODS FOR REINFORCED ADHESIVE BONDING

Bonding structure on gold thin film

Polyolefin-based composition, adhesives, and related multi-layered structures prepared therefrom

Thermo-reversible adhesive composition and thermo-reversible adhesive sheet comprising the same

Polyester polyols for reactive hot-melt adhesives

Joining dissimilar materials using an epoxy resin composition

Rubber-metal adhesive

Plastic-metal hybrid component and method for producing same

Sealing tape, phosphor sheet, lighting device, liquid-crystal display, method for manufacturing phosphor sheet, and sealing method

Pressure-sensitive adhesive sheet and magnetic disk drive

Rubber-metal laminated gasket material

Bonding composite structures using interpenetrating polymer network adhesives

Azole silane compound, surface treatment solution, surface treatment method, and use thereof

Method for the non-releasable connection of components or component regions and non-releasable connection

Methods of treating metal surfaces and devices formed thereby

Pre-processing method for adhering rubber layer to inner and outer surfaces of cylindrical object-of-adherence

Method for producing metal containing composite and metal containing composite formed by adhesion

Compliant attachment for an organic matrix composite component

Adhesive for rubber bonding

Surface-treated metal plate and metal plate-resin composite molded article

Slide bearing comprising a primer system as adhesion promoter

Method for joining metallic member and resin member to each other, manufacturing method for cooler, and cooler

Adhesive

Atraumatic detection/stimulation microlead

EDGE COATINGS FOR TAPES

Gas turbine engine ceramic component assembly and bonding material

Electromagnetic wave shielding support base-attached encapsulant, encapsulated substrate having semicondutor devices mounted thereon, encapsulated wafer having semiconductor devices formed thereon, and semiconductor apparatus

SOLAR CELLS AND MODULES INCLUDING CONDUCTIVE TAPES AND METHODS OF MAKING AND USING THE SAME

SOLAR CELLS AND MODULES INCLUDING CONDUCTIVE TAPES AND METHODS OF MAKING AND USING THE SAME

Adhesive composition and adhesive sheet using the same

Method for producing a bonded bow contact for current collectors

Laminate and process for producing same

Production of fibre composite component part based on aluminium and polyurethane

Adhesive composition and adhesive sheet, and hardened article and semiconductor device using same

Method and apparatus for preparing a surface for bonding a material thereto

Structural adhesives

Thermoset adhesive, automotive component using thermoset adhesive, and method of manufacturing same

Metal surface processing agent

Conductive sheet

HEAT-INSULATION FILM FOR HIGH TEMPERATURE MOLDING, VACUUM THERMAL INSULATOR USING SAME AND PROCESS FOR FABRICATING VACUUM THERMAL INSULATOR

Curable compositions comprising composite particles

Anaerobic curable compositions

Decorative sheet containing a polyurethane layer and structure

Conductive adhesive tape and manufacturing method thereof

Hose joint with adhesive

Conductive laminate, and touch panel comprising same

Pressure-sensitive hot melt adhesive composition including propylene thermoplastic elastomer and articles including the same

Adhesive film

Edge coatings for tapes

Methods of treating metal surfaces and devices formed thereby

Finned heat sink device with magnetic coupling to remove heat from a membrance roof after induction heating

Metal panel assembly and method for making same

Gas barrier adhesive sheet, method for producing same, electronic member, and optical member

Connecting element

Method of connecting two components as well as a component connection