Schaffhausen
Switzerland
514
2026-06-18
336
2026-02-24
These are the the leading inventors for applications assigned to TE Connectivity Solutions GMBH:
TE Connectivity Solutions GMBH based in Schaffhausen, CH has been assigned the rights to these inventions. The list includes both Pending Applications and Patent Grants:
Calrod Electrical Connector Assembly
#2 | 2026-06-18Electrical Connector Interface Having Protrusions For Sealing Against A Gasket
#3 | 2026-06-18Electrical Connector with Alignment and Retention Pins
#4 | 2026-06-11Angled Subassembly for an Angled Connector
#5 | 2026-06-04Input Voltage Connector for VPX Power Supply and Power Distribution
#6 | 2026-06-04Catheter Sensor Array
#7 | 2026-05-28Electrical Connector Contact and Connection Element with Electrical Connector Contact
#8 | 2026-05-21Snap-In Bridge Connector
#9 | 2026-04-30TAMPER DETECTION ASSEMBLY
#10 | 2026-04-30Self-Aligning Electrial Connector
#11 | 2026-04-30Electrical Connector for Mating with a PCB and an Electrical Connector Assembly
#12 | 2026-04-30High Gain Multiple Input, Multiple Output Antenna
#13 | 2026-04-23Cable Aluminum Foil Stripping Tool, Aluminum Foil Stripping Device And Aluminum Foil Stripping Method
#14 | 2026-04-23User Configurable Keyable Guide Pin/Module
#15 | 2026-04-23TERMINAL TAPE CONVEYING DEVICE
#16 | 2026-04-23HOT-BAR SOLDERING METHOD AND HOT-BAR SOLDERING SYSTEM
#17 | 2026-04-16Busbar Unit
#18 | 2026-04-16Resistor Carrier, Resistor Lead Bending System And Resistor Lead Bending Method
#19 | 2026-04-16Polyamide 56 Blended Composition With Reduced Moisture Absorption
#20 | 2026-04-093D Printed Connector With Interlocking Seal
#21 | 2026-04-09WIRE NODULE DETECTION DEVICE
#22 | 2026-04-09FORKLIFT SAFETY CONTROL SYSTEM AND FORKLIFT
#23 | 2026-04-09METHOD FOR CALIBRATING A MOBILE ROBOT
#24 | 2026-04-02Flexible Conductive Coating Formulation For Heat Shrink Tubing Applications
#25 | 2026-04-02Polyamide 56 Composition Containing a Polyolefin Mold Release Additive
#26 | 2026-04-02Polyamide 56 Composition Containing a Silicone Mold Release Additive
#27 | 2026-03-263D Printed Angled Coxial Connector
#28 | 2026-03-26RF MODULE HOUSING
#29 | 2026-03-19Heating Element, Electrical Connector, Connector Assembly and Manufacturing Method
#30 | 2026-03-19Inverted Coaxial Substrate Connector
#31 | 2026-03-12Connector and Electrical Connection Assembly
#32 | 2026-03-12TEMPERATURE DETECTOR, CONNECTOR, CONNECTOR ASSEMBLY AND ELECTRICAL CONNECTION SYSTEM
#33 | 2026-03-12Data Contact Device and Vehicle Communication Network with Data Contact Device
#34 | 2026-02-26System and Method to Determine Quality of Termination of Wire Using Thermal Characteristics
#35 | 2026-02-26COVER FOR A CONNECTOR AND CONNECTOR
#36 | 2026-02-26SENSOR MODULE
#37 | 2026-02-24 ✅ Patent 12,562,507 granted on 2026-02-24Direct wire terminal assembly
#38 | 2026-02-19PLUG CONNECTOR WITH ROTATABLE LATCH
#39 | 2026-02-05Heat Dissipation Assembly, Connector Assembly and Shielding Shell
#40 | 2026-02-05Connector For Direct Coaxial Cable To Substrate Termination
#41 | 2026-02-05Calibration Method For Sensor Module, Sensor Module And Smart Cleaning Device
#42 | 2026-02-05Self-Lubricating Connector
#43 | 2026-01-22Tooling to Crimp/Form on Top and Bottom with One Input Motion
#44 | 2026-01-08Wire Clamping Assembly and Connector Arrangement
#45 | 2026-01-08Contactor with Anti-Levitation Mechanism
#46 | 2026-01-08Sealed Contactor with External Fuse
#47 | 2026-01-08Power Switching Device with Self Diagnostic Capability
#48 | 2026-01-08Busbar Unit, Module Connecting Arrangement and Coupling Arrangement
#49 | 2026-01-01STRIP MATERIAL COLLECTION DEVICE AND STRIP MATERIAL COLLECTION METHOD
#50 | 2025-12-18 ✅ Patent 12,646,913 granted on 2026-06-02Method for Cable Braid Folding
#51 | 2025-12-18Electrical System with a Connector Having a Shorting Spring
#52 | 2025-12-18Connector
#53 | 2025-12-11Chip Product Polishing System and Method
#54 | 2025-12-04Seal Assembly
#55 | 2025-11-27Cable Buffering Device and Cable Supply System
#56 | 2025-11-27Cable Core Separation System
#57 | 2025-11-27CABLE WINDING DEVICE
#58 | 2025-11-20Mountable Touch Protection Cover, Interface, and Module Connector
#59 | 2025-11-20Terminal Strip Inspection System and Method
#60 | 2025-11-18 ✅ Patent 12,476,391 granted on 2025-11-18Direct wire terminal assembly
#61 | 2025-11-13Electrical Connection Module, Connector and Connector Assembly
#62 | 2025-11-13Contact Arrangement for an Electrical Switching Device and Electrical Switching Device
#63 | 2025-11-13Grasping Device, Gripper and Terminal Insertion Device
#64 | 2025-11-06Electrically Conductive Contact Assembly, Module Connector, Connection Assembly and Method for Mechanical Fastening
#65 | 2025-10-23 ✅ Patent 12,646,917 granted on 2026-06-02WILDLIFE GUARD ASSEMBLIES AND METHODS FOR USING SAME
#66 | 2025-10-16Seal For A Connector
#67 | 2025-10-16Terminator of A Connector Assembly
#68 | 2025-09-25Detection Device and Connector Assembly System
#69 | 2025-09-25Coaxial Contact System and Method for Electrically Connecting Two Outer Conductors
#70 | 2025-09-25Connector Kit, Manufacturing Method for a Connector Kit, and Connection Method to a Connector Kit
#71 | 2025-09-25Production System and Method For Electrical Connection Product
#72 | 2025-09-25METHOD FOR ADJUSTING POSTURE OF TWISTED PAIR CABLE AND METHOD FOR PROCESSING TWISTED PAIR CABLE
#73 | 2025-09-25Inspection Tool
#74 | 2025-09-25COMB TOOTH COMPONENT, WELDING STRENGTH DETECTION DEVICE AND METHOD
#75 | 2025-09-18Threaded Insert and Contact assembly with Threaded Insert
#76 | 2025-09-18Layered Plating Stack for Improved Contact Resistance in Corrosive Environments
#77 | 2025-09-18Tool Conveying Device and Heat Shrink Equipment
#78 | 2025-09-18Robot System
#79 | 2025-09-11Quick Disconnect Terminal With Split Mating Interface
#80 | 2025-09-11System for Connecting Two Separate Busbars to a Coaxial Busbar
#81 | 2025-09-11Front-Facing Locking Feature for Quick Connect Terminal
#82 | 2025-09-11Capacitive Voltage Sensor Arrangement Having a Tuning Circuit and Voltage Sensor System
#83 | 2025-09-04Housing Assembly for an Electrical Connector
#84 | 2025-09-04Contacting Assembly
#85 | 2025-08-28Cable Aluminum Foil Layer Processing Device and Method
#86 | 2025-08-28Shield Contact System
#87 | 2025-08-28Interconnection System with Electromagnetic Absorber with Improved Performance
#88 | 2025-08-28CABLE BRAIDED LAYER PROCESSING DEVICE AND METHOD
#89 | 2025-08-21Shield Contact System
#90 | 2025-08-21Terminal Strip Cutting System and Terminal Strip Cutting Method
#91 | 2025-08-14Contact Adapter, Busbar, Contacting System, Method of Contacting a Plurality of Batteries and Assembly Method for Creating a Plugged Battery Pack
#92 | 2025-08-14Transducer Assembly and Ultrasonic Sensor with Absorbing Element
#93 | 2025-08-07Connector Housing Assembly, Connector and Connector Assembly
#94 | 2025-08-07Female Connector Terminal Having a Cross-Section with at Least Five Sides
#95 | 2025-07-24Strip Feeding Hand Tool
#96 | 2025-07-24Induction Soldering Method for Terminating Terminals to FFC/PFC Cables to Various Terminals
#97 | 2025-07-24Slide Assist Dual Stage Unmate Connector
#98 | 2025-07-24Flat Flexible Cable Seal and Method
#99 | 2025-07-24System and Method To Handle Lax Objects
#100 | 2025-07-24Temperature Sensor for a High-Voltage Conductor and Method of Manufacturing such a Temperature Sensor
Also check out TE Connectivity Solutions GmbH's (Schaffhausen, Switzerland) applicant profile with 555 patent applications submitted.
328814 ⎘