Electronic component mounting package and package assembled substrate

Proton conductive film, process for producing the same, and fuel cell employing the proton-conductive film

Vertical production of photovoltaic devices

Land structure, printed wiring board, and electronic device

Photovoltaic device and manufacturing method of photovoltaic device

Mobile on-wing engine washing and water reclamation system

Method for repair soldering of multi-pole miniature plug connectors

ELECTRICAL CONNECTOR TERMINAL AND METHOD OF PRODUCING SAME

Flip chip interconnection having narrow interconnection sites on the substrate

Photovoltaic cell

Non-aqueous electrolyte battery and method for producing the same

Lithium ion secondary battery

ANODE, BATTERY, AND METHOD OF MANUFACTURING SAME

Cathode material and battery

Battery pack and vehicle

Flexible cathodes

Secondary battery of excellent sealability

Lithium rechargeable battery having electrode pin

Battery and battery housing

Pouch type lithium secondary battery and method of fabricating the same

Thin film battery with protective packaging

Cylindrical type secondary battery with upper and lower battery assemblies and fabrication method thereof

Cylindrical lithium rechargeable battery

Thin printable electrochemical cell utilizing a “picture frame” and methods of making the same

Pouch type lithium secondary battery with sleeve and method of fabricating

Lithium secondary battery

Catalyst materials for fuel cells

Electrolyte composition, solid electrolyte membrane, solid polymer fuel cell and manufacturing method for solid electrolyte membrane

CCM composite

Electrolyte membrane, electrolyte membrane composite, method of manufacturing electrolyte membrane composite, electrolyte membrane-electrode assembly for fuel cell, method of manufacturing electrolyte membrane-electrode assembly for fuel cell, and fuel cell

Fuel cell with bipolar plates having micro channels and its manufacturing method

Apparatus and methods for a physical layout of simultaneously sub-accessible memory modules

Multilayer circuit board with embedded components and method of manufacture

Secondary battery protecting module and lead mounting method

Rechargeable battery having bare cell and protection circuit module

Rechargeable battery module

Polymer battery pack

Continuous coating process for composite membranes

Carbon fiber paper construction and manufacturing process

Method for fabricating flip-attached and underfilled semiconductor devices

Integrated circuit package

Stress absorption layer and cylinder solder joint method and apparatus

Hybrid chip fuse assembly having wire leads and fabrication method therefor

Stressed organic semiconductor

Fully integrated organic layered processes for making plastic electronics based on conductive polymers and semiconductor nanowires

Method for manufacturing photoelectric transducer, and electronic apparatus

THIN-FILM PHOTOELECTRIC CONVERSION DEVICE AND A METHOD OF MANUFACTURING THE SAME

Photoelectric conversion device, image display, method of manufacturing photoelectric conversion device, and method of manufacturing image display

Circuit board for surface-mount device to be mounted thereon

Flip-chip adaptor package for bare die

System and method to increase die stand-off height

Semiconductor integrated circuit arrangement device and method

Proton-conducting membrane and use thereof

Current collector

Electrode for an electrochemical cell, electrode coil, electrochemical cell, and production method

Film covered electric device and method of manufacturing the same

Cap assembly mold and secondary battery having the same

Electrode for polymer electrolyte fuel cell, separator therefore, and polymer electrolyte fuel cell, and generating system using them

Fuel battery

Thin film solid oxide fuel cell with lithographically patterned electrolyte and anode layers

Photovoltaic device

Light emissive plastic glazing

Devices having compliant wafer-level input/output interconnections and packages using pillars and methods of fabrication thereof

Rechargeable battery and its fabrication

Method for manufacturing an organic semiconductor device, as well as organic semiconductor device, electronic device, and electronic apparatus

Method for low-temperature, hetero-epitaxial growth of thin film cSi on amorphous and multi-crystalline substrates and c-Si devices on amorphous, multi-crystalline, and crystalline substrates

Stressed organic semiconductor

Method to accommodate increase in volume expansion during solder reflow

Memory module and signal line arrangement method thereof

Polymer photovoltaic cell

Germanium solar cell and method for the production thereof

Stacked photovoltaic device and method of manufacturing the same

Method of manufacturing a solor cell module

Formation of compound film for photovoltaic device

Method for controlling quality in a gravure-printed layer of an electroactive device

Suspensions for use as fuel for electrochemical fuel cells

Battery and method for manufacturing same

Method of manufacturing nickel zinc batteries

Method of making a catalyst

Method of manufacturing photoreceiver

Methods for packing microfeature devices and microfeature devices formed by such methods

Nonaqueous electrolytic secondary battery and method of manufacturing the same

Cathode active material, method of preparing the same, and cathode and lithium battery applying the material

Non-aqueous electrolyte secondary battery

Non-aqueous electrolyte secondary battery

Battery

Rechargeable battery and method of assembling for the same

Battery and method of manufacturing same

Wafer alkaline cell

Lithium ion secondary battery

Lithium ion secondary battery

Electrochemical device comprising aliphatic mono-nitrile compound

Transition metal nitride and fuel cell applications

IONIC CONDUCTOR, METHOD OF MANUFACTURING THE SAME, AND ELECTROCHEMICAL DEVICE

Aromatic polymer, film, electrolyte membrane and separator

Adaptor type fuel cell and assembly structure thereof

Reinforced matrix for molten carbonate fuel cell using porous aluminum support and method for preparing the molten carbonate fuel cell comprising the reinforced matrix

Method for manufacturing absorber layers for solar cell

Method of making a composite membrane

Substrate, device and method for forming a guidance structure in the substrate, and positioning method

Method of mounting a substrate to a motherboard

Apparatus including a dielectric mirror and method of reflecting radiation away from a portion of an apparatus

Wired circuit board

Silicon plate, producing method thereof, and solar cell

Semiconductor device and method for manufacturing the same

Composite membrane

Electrochemical cell suitable for use in electronic device

Continuous rotary hole punching method and apparatus

Manufacturing method of secondary battery, restraining jig for secondary battery, charging/discharging device for secondary battery, and charging device for secondary battery

Electrical contacts having solder stops

Thin film semiconductor device comprising nanocrystalline silicon powder

Lithium ion secondary battery and method for producing the same

Negative electrode for non-aqueous secondary battery

Battery pack of improved stability

Membrane electrode assembly, method for manufacturing the same, and polymer electrolyte fuel cell

Method of manufacturing a fuel cell bipolar plate

Polymer electrolyte fuel cell

Solid polymer electrolyte membrane and production method of the same

Power generating system using fuel cell

Ion conductive polymer electrolyte and its membrane electrode assembly

Solid oxide fuel cell

Solid oxide fuel cell

Organic thin film transistor array panel and method of manufacturing the same

Thermally decoupling fuse holder and assembly

Secondary lithium battery module

Method of making an ion transport membrane oxygen separation device

Semiconductor package with passive device integration

METHOD AND APPARATUS FOR MOUNTING AND REMOVING AN ELECTRONIC COMPONENT

Carbon nanotube Schottky barrier photovoltaic cell

Method for producing non-aqueous electrolyte secondary battery

Method and apparatus for configurable printed circuit board circuit layout pattern

Thermally conductive adhesive composition and process for device attachment

Liquid fluoropolymer composition, process for producing organosol, film, and fuel cell

FUEL CELL GAS DIFFUSION LAYER COATING PROCESS AND TREATED ARTICLE

Structure using soldering and soldering method

Smooth surface liquid phase epitaxial germanium

Polycrystalline sillicon substrate

Germanium infrared sensor for CMOS imagers

Radio frequency module and fabrication method thereof

Method of manufacturing a flexible electronic device and flexible device

Lithium ion secondary battery

Intercalation anode protection for cells with dissolved lithium polysulfides

Nonaqueous electrolyte secondary battery and charge/discharge system thereof

Galvanic cell

Battery with laminated film covering and fabrication method

Manufacturing method of flexible substrate laminate integrated fuel cell and fuel cell thereof

Organic-inorganic hybrid material comprising a mineral mesoporous phase and an organic phase, a membrane and fuel cell

Method to make conductive hydrophilic fuel cell elements

Method for producing a membrane for a fuel cell

Method for producing a protective coating for substrates that are subjected to high temperatures and form chromium oxide

Energy storage device

Head gimbal assembly method with solder fillet formed by laser irradiating a shaped solder mass

Semiconductor device with a recessed bond pad

Electronic device, standoff member, and method of manufacturing electronic device

Method of forming electronic devices

Via attached to a bond pad utilizing a tapered interconnect

Material for photovoltaic film, solar cell, process for producing photovoltaic film material and process for producing photovoltaic film

Patch substrate for external connection

Method for making a sub-micron solid oxide electrolyte membrane

Method of fabricating avalanche photodiode

Method of forming high-luminescence silicon electroluminescence device

Methods for fabricating semiconductor devices so as to stabilize the same when contact-bearing surfaces thereof face over test substrates

Nonaqueous electrolyte secondary battery

Lithium ion secondary cell

Nanowire-based membrane electrode assemblies for fuel cells

Noble metal nanoparticles, a process for preparing these and their use

Method for manufacturing a wind turbine blade

Land grid array package

Semiconductor device and unit equipped with the same

High frequency unit

Solar cell using carbon nanotubes and process for producing the same

Side-view type light emitting device

Semiconductor apparatus and fabrication method of the same

Accurate relative alignment and epoxy-free attachment of optical elements

Universal pattern of contact pads for semiconductor reflow interconnections

Printed board

Method of forming a multijunction solar cell structure with a GaAs/AIGaAs tunnel diode

Photoelectric conversion element and process for fabricating the same, electronic apparatus and process for fabricating the same, and semiconductor layer and process for forming the same

Silane composition, silicon film forming method and solar cell production method

High efficiency solar cells utilizing wafer bonding and layer transfer to integrate non-lattice matched materials

Method of manufacturing secondary battery electrode, apparatus for manufacturing the same and secondary battery electrode

Semiconductor memory module for improvement of signal integrity

Catalyst structure, process for producing same and fuel cell provided with catalyst

Boron diffusion in silicon devices

Porous structures useful as bipolar plates and methods for preparing same

Radiating member for laminated battery and method of manufacturing the same

Proton-conducting polymer membrane comprising sulfonic acid-containing polyazoles, and use thereof in fuel cells

Solid polymer electrolyte composite membrane comprising porous ceramic support

Method for reducing degradation in a fuel cell

Conductive organic-inorganic hybrid material comprising a mesoporous phase, membrane, electrode and fuel cell

Fine pitch low cost flip chip substrate

Film comprising organic semiconductors

Polymer electrolytic material, polymer electrolytic part, membrane electrode assembly, and polymer electrolyte fuel cell

Method for reducing stress between substrates of differing materials

Printed-wiring board, printed-circuit board and electronic apparatus

Thin-film solar cell

Solar cell, solar cell string and method of manufacturing solar cell string

Layer-to-layer interconnects for photoelectric devices and methods of fabricating the same

Photoreceptive layer comprising metal oxide of core-shell structure and solar cell using the same

Rechargeable lithium polymer cell and process for the production of rechargeable lithium polymer batteries

Method for interconnecting semiconductor components with substrates and contact means

Semiconductor device and process for producing the same

Method and apparatus for dissipation of heat generated by a secondary electrochemical cell

Nonaqueous electrolyte secondary battery

Nickel-metal hydride storage battery and method of manufacturing the same

Partition wall for a bipolar battery, bipolar electrode, bipolar battery and method for producing a partition wall

Secondary battery module with exposed unit cells and insulation between terminals

Process for manufacturing plate electrode stackings

Gas diffuser substrate containing catalysts for fuel cells, in addition to a method for the production thereof

Reinforced composite ionic conductive polymer membrane, fuel cell adopting the same, and method of making the same

Sulfonated polyelectrolyte membranes containing perfluorosulfonate ionomers

Direct hydrocarbon fuel cells

Wired circuit board and producing method thereof

Battery pack casing with lock type connector

Connection between members

Ball grid array package

Interposers with flexible solder pad elements

Fabrication of low leakage-current backside illuminated photodiodes

Method of manufacturing an epitaxial semiconductor substrate and method of manufacturing a semiconductor device

Method and system for controlling semiconductor manufacturing equipment

Fabrication of low leakage-current backside illuminated photodiodes

Conductive member, disk drive using same, and conductive member fabricating method

Water-based electrolyte gel for dye-sensitized solar cells and manufacturing methods

Water-based electrolyte gel for dye-sensitized solar cells and manufacturing methods

Optoelectronic device and frabrication method

TiO2 aerogel-based photovoltaic electrodes and solar cells

Avalanche multiplication photosensor employing extremely thin molecular crystal and process for fabricating the same

Membrane electrode assemblies and method for manufacture

Methods for reducing delamination during chemical mechanical polishing

Circuit board for mounting a semiconductor circuit with a surface mount package

Compliant electrical contacts

DRAM arrays, vertical transistor structures and methods of forming transistor structures and DRAM arrays

Separator for storage battery, storage battery and method of producing storage battery

Non-aqueous electrolyte rechargeable battery and manufacturing method of negative electrode employed therein

Battery

Polymer battery module packaging sheet and a method of manufacturing the same

Electrochemical cell with improved internal contact

Solid electrolyte battery

Non-aqueous electrolyte secondary battery

Fuel cell, electrode material for fuel cell and method for producing same

Polymer electrolyte membrane and fuel cell using the same

Method of producing solid electrolyte and solid electrolyte

Deposited structures

Thin film fuel cell electrolyte and method for making

Solid-oxide fuel cell and method for producing the same

Composites and composite membranes

Ni-Al alloy anode for molten carbonate fuel cell made by in-situ sintering the Ni-Al alloy and method for making the same

MOUNTING STRUCTURE AND METHOD OF SURFACE-MOUNT CRYSTAL OSCILLATOR

Sensing board assembly for secondary battery module

Printed wires arrangement for in-line memory (IMM) module

Circuit board and semiconductor device

Light receiving or light emitting modular sheet and process for producing the same

Energy conversion film and quantum dot film comprising quantum dot compound, energy conversion layer including the quantum dot film, and solar cell including the energy conversion layer

Composition and method for making fuel cell collector plates with improved properties

Soldering method and apparatus

Electric power steering system using wound lead storage battery as power supply, and motor and inverter used in same

Non-Aqueous Electrolyte Secondary Battery and Method of Manufacturing the Same

Process for manufacturing an electrochemical cell and an electrochemical cell

Dynamic resource allocation platform and method for time related resources

Off-grid decoupling of ball grid array (BGA) devices and method

Organic semiconductor structure, process for producing the same, and organic semiconductor device

Solar cell structure with solar cells having reverse-bias protection using an implanted current shunt

Nonaqueous electrolyte secondary battery

Closed nickel-hydrogen storage battery and its production method

Electrode coated with a film obtained from an aqueous solution comprising a water-soluble binder, production method thereof and uses of same

Electrochemical device

Secondary battery

Battery pack having a battery unit of sheet-shaped secondary batteries connected through a terminal block

Ion conducting battery separator for lithium batteries, method for the production and use thereof

Thin membrane electrode assembly for fuel cell and fuel cell including the same

Constituting part for fuel battery

Flame-resistant acrylic fiber nonwoven fabric, carbon fiber nonwoven fabric, and method for production thereof

Solid oxide reversible fuel cell with improved electrode composition

Polymer electrolyte membrane for fuel cell, method for preparing the same, and fuel cell system comprising the same

Mixed ion conductor

Polymer electrolyte membrane, method for the production thereof, and application thereof in fuel cells

Sub-micron solid oxide electrolyte membrane in a fuel cell

Fuel cell system ensuring stability of operation

Polyarylene ether compound containing sulfonic acid group, composition containing same, and method for manufacturing those

Polymeric laminates, processes for producing the same, and use thereof

Fuel cell incorporating a polymer electrolyte membrane grafted by irradiation

Carbon-metal composite material and process of preparing the same

Carbon nanoparticles and composite particles and process of manufacture

Radial circuit board, system, and methods

Sensor with narrow mounting profile

Method for the production of a connection flange

Fuel cell bipolar plates with multiple active areas separated by non-conductive frame header

Electronic assembly with reduced leakage current

Semiconductor electrode, method of manufacturing the same, and solar cell employing the same

Cerium dioxide-based electrode-electrolyte pair (variants), method for the production thereof (variants) and organogel

Method of making an electronic assembly

Electronic circuit board

Sealing agent for photoelectric conversion device and photoelectric conversion device using the same

Electrode substrate, photoelectric conversion element, conductive glass substrate and production method thereof, and pigment sensitizing solar cell

Photovoltaic apparatus and mass-producing apparatus for mass-producing spherical semiconductor particles

Coating apparatus and organic electronic device fabricating method

Membrane module for the separation of hydrogen and method for the production thereof

Zeolite adsorbent for desulfurization and method of preparing the same

Process for preparation of secondary battery module

Sulphonated multiblock copolymer and electrolyte membrane using the same